Airvent Mixflow ECIF40W-150 Owner's Manual

PRODUCT SPECIFICATIONS
225mm 315mm
249mm 330mm
Model Height Width Length
ECIF40W-150 208.5mm 225mm 315mm
ECIF50W-150 208.5mm 225mm 315mm
ECIF40W-150T 208.5mm 225mm 315mm
ECIF50W-150T 208.5mm 225mm 315mm
ECIF200-PRO
233.8mm 249mm 330mm
ECIF200-MAX
81mm
100mm
Pre-drill
Spigot Junction
Run On
hole
Weight
Diamete Box
Timer
Distance
148
81mm 60mm 2.3kg NA
148 81mm 60mm 2.3kg NA
1-60mins
148 81mm 60mm 2.53kg
148 81mm 60mm 2.53kg 1-60mins
196 100mm 80mm 3.62kg Ext.
Mixflow Inline Fan
EC Greenline series
Owner's Manual
ECIF40W-150 / ECIF40W-150T
ECIF50W-150 / ECIF50W-150T
ECIF200-PRO/ ECIF200-MAX
OWNER'S MANUAL
This manual focuses on the safety precautions in the installation, and the use and maintenance of the
product. It is important that these installation and maintenance instruction are fully adhered to, be sure to
read this manual carefully before installing and using this product.
WARNING
• All electrical installations must be carried out by suitably qualified and competent personnel in accordance
with all statutory requirements.
• The fan is designed for use in an ambient temperature of up to 40-degree. It is not suitable for corrosive or
explosive atmospheres.
• The installer should provide easy access to the fan to facilitate future maintenance and ensure that the fan
is adequately supported.
• This product is not intended for use by persons (including children) with reduced physical sensory or
mental capabilities or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the product by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the product.
• Precautions must be taken to avoid back-flow of gases into the room from the open flue of gas or other fuel
burning appliances.
• A minimum of one (1) metre of duct is to be fitted to the fan inlet and discharge spigots.
www.airvent.com.au