Page 1
( D X W X H inches ) ( D X W X H inches ) ( inches ) FRIIA Sparkling variants require food-grade CO 3b Font 6.6 x 4.7 x 11.2 5.4 x 1.1 x 11.2 (not supplied by Marco). 1000862 For more information visit www.marcobeveragesystems.com...
Page 2
FRIIA HC & FRIIA HCS FRIIA HOT/COLD & FRIIA HOT/COLD/SPARKLING FRIIA HC ( 220/110v ) 5002868US/5001868US COUNTER CUT - OUT WITH DRIP TRAY FRIIA HCS ( 220/110v ) 5002869US/5001869US 1.25”/32mm 4”/100mm For drip-tray only Connecting Hoses 8.5”/210mm 10.2”/259mm POWER VENT COLD POWER COLD...
Page 3
FRIIA SYSTEM OVERVIEW COUNTER CUT - OUTS RADIUS OF MAXIMUM FONT PLACEMENT 1.25”/32mm Standard 31.5” high cabinet 4”/100mm For drip-tray only 23.6”/600mm CABINET OPERATING ENVIRONMENT Min: 31.5” (h) x 23.6” (w) x 23.6” (d) with 3.9” clearance around Cannot exceed temperature of 95°F machines all sides VENTILATION 10.4”/265mm...
Page 4
FRIIA PERFORMANCE & MAINTENANCE FRIIA OUTPUT VOLUME Based on flow rate of 0.3 GAL/min and ambient temperature of 68-77°F. Chart indicates FRIIA chilling capacity based on incoming water temperature and desired output water temperate. 13.2 11.8 10.5 82.4 °F) INCOMING TEMPERATURE ( Output Temp 37.4°F Output Temp 41°F Output Temp 44.6°F...
This manual is also suitable for:
Friia hcs 5001869usFriia hcs plus 5002867usMix uc3 1001880usMix uc3 1000880usMix uc8 1000887us3b font 1000862...
Show all