Page 1
These instructions are for installing a Drop-in sink, which is installed from above and sealed to the top of the counter. Works with sink kits 672-4150, 672-4153, 672-4154, 672-4155, 675-4156, 672-4157, 672-4321, 672-4322, 672-4324 BEFORE INSTALLING THE SINK, INSPECT IT FOR DAMAGE. DO NOT INSTALL A DAMAGED UNIT.
Page 2
Step 1 Single Bowl Double Bowl THIS STEP ONLY FOR NEW COUNTER INSTALLATION, IF YOU HAVE AN OLD COUNTER TOP ALREADY CUT, PLEASE GO TO STEP 2. (For laminate counter top only, other materials should refer to the counter top manufacturer's recommendations.) Locate template, put masking tape over the area where your sink cut-out will be,...
Page 3
Step 5 Apply a small bead of silicone caulk compound completely around all edges of sink opening, Stay approximately 1/4" from cut-out, Use only a 1/8" to 1/4" bead of silicone. Note: Using too much sealant may keep the sink from properly sealing to the counter top.
Page 4
Stainless Steel Sink Care: After Each Use: Remove all objects, pads, grids, cloths, etc., from sink. Clean with light soap solution, rinse, drain all water and towel dry. Regular Maintenance: Side Walls and Bottom of Sink: Remove stains using a cleaning product that contains mild abrasives; always wipe in grain direction;...
This manual is also suitable for:
672-4153672-4154672-4155675-4156672-4157672-4321...
Show all