Advertisement
Quick Links
Codelocks Support
CL4500 - Getting Started Guide
Notice: The C3 Smart App replaced the K3 Connect App on February 14, 2023. For more information on
how to download, set up and use C3 Smart with your Codelocks Smart Locks,
visit: c3smart.net or contact Codelocks Support.
About Codelocks Smart Locks
The CL4500 and CL5500 locks can be operated and managed directly via the keypad or via a compatible
smartphone by downloading the C3 Smart App. This Getting Started Guide contains the common functions to
enable you to quickly program your lock.
For detailed instructions, refer to the Programming + Operating Instructions online
at: codelockssupport.com/smartlocks
The Basics
Master Code
The factory set Master Code is #12345678. This should be changed immediately after installation (Program 01).
The Master Code (and Sub-Master Code if set) always start with the # button. This puts the lock into
Programming Mode.
Programming
Each programming sequence starts with the #Master Code or #Sub-Master Code. The singular
throughout the sequence represent an acceptance flash; the keypad will illuminate blue to confirm a correct input.
At the end of a sequence, the keypad will flash twice
successful.
Access Methods
The lock supports a maximum of 350 Clients (users): User Codes (100), User Cards (150) and User Compatible
Phones (100).
https://codelocks.zohodesk.eu/portal/en/kb/articles/cl4500-getting-started-guide-16-1-2023
• •
confirming it's complete and programming has been
•
blue dots
Advertisement
Summary of Contents for D&D Technologies Codelocks CL4500
- Page 1 Codelocks Support CL4500 - Getting Started Guide Notice: The C3 Smart App replaced the K3 Connect App on February 14, 2023. For more information on how to download, set up and use C3 Smart with your Codelocks Smart Locks, visit: c3smart.net or contact Codelocks Support. About Codelocks Smart Locks The CL4500 and CL5500 locks can be operated and managed directly via the keypad or via a compatible smartphone by downloading the C3 Smart App.
-
Page 2: Device Compatibility
Keypad The lock has a 12 button, backlit keypad which includes * and # buttons. The # button is only used for programming. The * button is used in some programming sequences and with NetCodes. Code Free Code Free can be configured via Program 04 (refer to the Programming + Operating Instructions) or via Key-in- Lever by changing the cylinder tailpiece (refer... - Page 3 address verified, sign in to the App. 4 To add a new lock, select the + icon on the Locks screen. 5 Enter the lock DIN and a name for your lock. We recommend choosing a meaningful name. Note: The lock DIN is case sensitive. Lock Model ...
-
Page 4: Factory Reset
at codelockssupport.com/smartlocks Factory Reset The lock can be reset to its original factory settings. You may need to do this if the Master Code is no longer known or you no longer have management access via a smartphone. To reset the lock, you must have access to the battery compartment in the rear of the lock. - Page 5 #Master Code • 15 • 1 • • Example: #12345678 • 15 • 1 • • Result: Lockdown is enabled - only the Master Code and Sub-Master Code can be used to open the lock. 15.2 Disable Lockdown #Master Code •...
-
Page 6: Troubleshooting
Troubleshooting Incorrect Code/Card If 3 incorrect access attempts are made, the lock will suspend activity for 30 seconds. Programming Error If a programming mistake is made, the keypad will flash red and the lock will revert to normal operation. Battery Failure If the battery fails, the key override should be used to open the lock. - Page 7 https://codelocks.zohodesk.eu/portal/en/kb/articles/cl4500-getting-started-guide-16-1-2023...