Related Manuals for Omega PRS Series
Summary of Contents for Omega PRS Series
- Page 1 ® User’s Guide Shop online at omega.com e-mail: info@omega.com For latest product manuals: www.omegamanual.info NORWALK, CT PRS-TMM12 Integral Transmitter Style PRS Series Sanitary RTD Transducer...
- Page 2 24 Vdc is recommended. Transmitter Zero and Span Adjustments: PROCESS CONNECTION The Omega PRS-TMM12 is normally supplied with a 1-1/2"-16AMP flange (other sizes are also available) so it can be easily installed into new or existing systems. A commercially available gasket is placed between the...
- Page 3 Re-assemble the housing as follows: regarding wiring, calibration and troubleshooting 1. When re-assembling the cap to the housing, of the transmitter. position lead wires to insure that they will not Note: The plastic shell of the transmitter is be pinched during replacement of the cap. removed during assembly of the PRS-TMM12 2.
- Page 4 Authorized Return (AR) number immediately upon phone or written request. Upon examination by OMEGA, if the unit is found to be defective, it will be repaired or replaced at no charge. OMEGA’s WARRANTY does not apply to defects resulting from any action of the purchaser, including but not limited to mishandling, improper interfacing, operation outside of design limits, improper repair, or unauthorized modification.