Advertisement
Quick Links
Bathtub manufacturer
Dealer name
Electronic control model and serial number
Blower model and serial number
Thank you for your confidence in CG AIR SYSTÈMES INC. We can assure you that CG AIR SYSTÈMES INC. uses the best materials and applies the most
strict quality control measures to ensure that each and every unit meets the highest standards of quality. Furthermore, all CG AIR SYSTÈMES INC. com-
ponents comply with the requirements of the Canadian Standards Association (CSA) and Underwriters Laboratories (UL).
FUNCTIONS
FUNCTIONS: SINGLE SYSTEM (1 KEYPAD TO ACTIVATE 1 TMS CONTROL)
TMS KEYPAD - VARIABLE SPEED
} Press this key to start or stop
the blower or the pump.
} Press and hold this key to increase
or decrease the blower or
the pump speed until desired level.
} 1
st
press; speed will vary gradually
from maximum to minimum.
} 2
nd
press; speed will go directly to minimum
and then straight back to maximum.
} 3
rd
press; returns to maximum speed.
FUNCTIONS: DOUBLE SYSTEM (1 KEYPAD TO ACTIVATE 2 TMS CONTROLS)
Here is an example of a keypad
which activates two TMS controls:
1 VARIABLE
SPEED CONTROL
+
1 SPEED CONTROL WITH
AUXILIARY OUTPUT
Depending on which control
is used to operate the system,
button icons may differ.
TMSV > VARIABLE & P/VARIABLE
2013-01-04
INSTALLATION & OPERATING INSTRUCTIONS FOR ELECTRONIC CONTROLS
IC-TMSV-120/60, IC-TMSV-120/60-L & IC-TMSV-240/60
IC-TMSPV-120/60, IC-TMSPV-120/60-L & IC-TMSPV-240/60
IMPORTANT: KEEP FOR WARRANTY
TMS KEYPAD - 1 SPEED
} Press this key to start
the blower or the pump.
} Press this key to stop
the blower or the pump.
TMS KEYPAD - VARIABLE SPEED WITH AUXILIARY OUTPUT
} Press once to start the blower or the pump.
} Press a second time to stop
the blower or the pump.
} Press and hold 3 sec., speed will gradually vary
between maximum and minimum.
} Press and hold 6 sec., speed will go directly
to minimum and then straight back to maximum.
} Press and hold this key to increase or decrease
the blower or the pump speed until desired level.
} Press this key to start or stop the auxiliary equipment.
They always start at maximum speed.
TMS KEYPAD - 1 SPEED WITH AUXILIARY OUTPUT
Purchase date
Pump model and serial number
} Press this key to start
the blower or the pump
} Press this key to stop
the blower or the pump
} Press this key to start or stop
the auxiliary equipment.
ENGLISH
Phone
Advertisement
Summary of Contents for CG AIR IC-TMSV-120/60
- Page 1 Pump model and serial number Thank you for your confidence in CG AIR SYSTÈMES INC. We can assure you that CG AIR SYSTÈMES INC. uses the best materials and applies the most strict quality control measures to ensure that each and every unit meets the highest standards of quality. Furthermore, all CG AIR SYSTÈMES INC. com- ponents comply with the requirements of the Canadian Standards Association (CSA) and Underwriters Laboratories (UL).
- Page 2 CAUTION INSTALLATION 1. Read these instructions and rules carefully. Failure to follow them could 1. For an electronic control not provided with NEMA plugs, connect the cause a unit malfunction. Warning! A malfunction could cause serious factory pre-installed 14/3 type SJ cable to a junction box (not provided bodily injuries, and/or property damages.
- Page 3 INSTALLATION: DOUBLE SYSTEM (1 KEYPAD TO ACTIVATE 2 TMS CONTROLS) INSTALLATION FOR UL CERTIFICATION - 120 VOLTS INSTALLATION FOR UL OR CSA CERTIFICATIONS - 120 VOLTS IMPORTANT: IMPORTANT: MAIN BREAKER MAIN BREAKER 15A/240V DOUBLE POLE BREAKER WITH GROUND 15A/240V DOUBLE POLE BREAKER WITH GROUND PANEL PANEL FAULT CIRCUIT INTERRUPTER CLASS "A".
- Page 4 The blower or pump never stops: CG AIR SYSTÈMES INC. is not responsible for any damages or claims result- 1. Verify that the blower is well connected to the control box. ing from defects that could have been discovered, repaired or avoided 2.