Advertisement
Quick Links
GAS LIFT REMOVAL GUIDE
Parts List
Use the chair lift lever to raise your office chair to the highest position.
Lay the office chair on its side. Separate the two provided shaft collars
and attach them to the old chair cylinder using the shorter screws and
Allen wrench. Slide both shaft collars as close as you can to the chair
mechanism.
Tighten only shaft collar B so it clamps the cylinder very
tightly and is not able to slide. (make sure the threaded
holes in both shaft collars are not directly aligned)
A
B
Advertisement
Related Manuals for NobleChairs HERO DOOM EDITION
Summary of Contents for NobleChairs HERO DOOM EDITION
- Page 1 GAS LIFT REMOVAL GUIDE Parts List Lay the office chair on its side. Separate the two provided shaft collars Use the chair lift lever to raise your office chair to the highest position. and attach them to the old chair cylinder using the shorter screws and Allen wrench.
- Page 2 Use the two longer screws to thread into shaft collar B. Using the As you continue to tighten these screws, shaft collar A will start to slide Allen Wrench, tighten both screws evenly so they begin to press and the cylinder wil pull away from the chair mechanism. against the shaft collar A.