SMARTFIND S20 AIS FITTING INSTRUCTIONS FOR THE CREWFIT 180N PRO
1.
2.
3.
4.
5.
8.
7.
6.
Contents of box:
S20 unit
Information card
1.
2.
3.
Warranty information
4.
Oral tube bracket
5.
Oral tube to unit adapter
6.
S20 pouch
7.
Crocodile clip
8.
User manual.
To fit the S20
unit to your lifejacket you will need the
Information card, Crocodile clip, and user manual.
3
Attaching crocodile clip.
Attach the crocodile clip
(a) to the integrated PLB/Light bracket (b) as shown
above.
1
Untie lanyard.
The S20 is supplied with an orange
lanyard loosely tied onto the white section of the
S20. Undo this knot, so there is a short lanyard to
the orange tab and a long loose lanyard.
4
Attaching S20 unit.
Attach the S20 unit (a) to the
crocodile clip (b) by sliding it down the recess until
an audible click is heard.
2
Open lifejacket.
Open up the left side of the lifejacket to
reveal the integrated PLB/Light bracket.
5
Tie the lanyard.
Once the unit is attached to the
lifejacket tie the orange lanyard to the bladder retainer
using a bowline. Tie off as short as possible, taking
up all the slack without distorting the shape of the
lifejacket.