NORBY Combi One Manual

Thank you for purchasing the Combi One/
The product offer tri-colour Navigation light and anchor light at a very low power consumption. The product is desig-
ned in high quality for many years usage in harsh marine environment.
The installation is easy and the product can be mounted / unmounted easily again with the connector.
Positioning and Operation
May only be installed on sailing vessels of less than 12 meters length for COMBI ONE and 20 meters for COMBI TWO.
•
Carried near the top of the mast, where the light can be seen all round without any obstructions.
•
Use only when vessel is driven under sails an no power are used.
•
Connecting power
• Supply Voltage between 10VDC and 30VDC
• Recommended <2A (slow) fuse or circuit breaker
Specifications
UV/corrosions resistant anodized aluminium or black powdered
Lamp House
UV resistant PMMA
Lamp Lens
316 stainless steel
Mounting bracket
1 Nautical Miles (yacht) Navigation light (Combi One)/
Visible Distance
2 Nautical Miles (yacht) Navigation light (Combi Two)
2 Nautical Miles (yacht) Anchor light
Light Source
LED
Voltage protection
Reverse polarity protected
Spike protected to +500 volts
Electromagne C t ic ompatibilities
Power Consumption
Port, Starboard and stern 1 or 2W Allround White / Anchor 1W
Dimensions
75mm (diameter) x 75mm (height)
Weight
430g
Warranty:
1 years product limited warranty. If you want to claim a warranty for your product,
please write an email to claim@norbylight.com
Combi One/Two - Instructions
COMBI ONE/TWO
Navigation light
Two
(EMC)
Page 1/2