Advertisement
Quick Links
Advertisement
Related Manuals for Phase Technology DCB-112-SUB
Summary of Contents for Phase Technology DCB-112-SUB
- Page 1 DIGITAL AUDIO REFERENCE THEATER SYSTEM SYSTEM INSTALLATION GUIDE...
-
Page 2: Speaker Placement
This will give him the information to properly set up the volume levels and delays for each speaker, and then it will automatically generate a series of correction filters to load into your Phase Technology DP2000 amplifier/speaker controller. This correction process will then return your speakers to their original perfectly matched levels, and remove the room’s harmful acoustic contributions, leaving you with superb sonic... -
Page 3: System Wiring And Connection
The heart of the dARTS system is the DP2000 digital amplifier/controller. It consists of a 16-channel power amplifier (up to 250 w/ch), the setup firmware used by Phase Technology to individually match your speakers to each other (frequency response, crossover, time alignment), and space for the room correction program your installer will run to calibrate the system to your room. -
Page 4: Speaker Connections
ALL system connections have been securely made. PREAMP OUTPUT CHANNELS RIGHT SURROUND LEFT SIDE IN 7.1, OR REAR CENTER IN 6.1 SPEAKER CONNECTIONS OUTPUT NUMBERS CENTER WOOFER/MIDRANGE CENTER TWEETER TO SUBWOOFER(S) LEFT FRONT RIGHT FRONT CENTER SUBWOOFER LEFT SURROUND RIGHT SIDE IN 7.1 DP2000 SPEAKER CONNECTIONS... -
Page 5: Specifications
Frequency Response (+/- 2dB) 40 Hz-30 kHz Dimensions (inches W xH xD ) 14 x14 x 8.57 ©2005 Phase Technology Corporation 6400 Youngerman Circle Jacksonville, FL 32244 (888)PHASE TK SPECIFICATIONS DCB5.0-C DCB-SURR Horizontal center Dipolar/bipolar surround (1) 6.5" (2) 6.5"...