Download Print this page

Infinite Show Me SMCF2U400 Owner's Manual

Vertical wall mount rack enclosure

Advertisement

Quick Links

Owner's Manual: Vertical Wall Mount Rack Enclosure
THIS MANUAL APPLIES TO THE FOLLOWING SKUs: SMCF2U400, SMCF2U600, SMCF2U700,
SMCF3U500, SMCF3U400, SMCF3U600, SMCF3U700, SMCF4U500, SMCF4U900, SMCF4U400,
SMCF4U600, SMCF4U700, SMCF5U400, SMCF5U600, SMCF5U700, SMCF6U500, SMCF6U900,
SMCF6U400, SMCF6U600, SMCF6U700, SMCF8U500, SMCF8U900, SMCF8U400, SMCF8U600,
SMCF8U700
Keep this information for further reference.
Thank you for purchasing a ShowMeCables product. In case of any questions regarding the installation or use of
product, please call us at 866.488.2926.
Please examine the product for any damaged parts. If any part is damaged or missing, contact ShowMeCables
for further assistance. Do not attempt to install or use product if it has been damaged.
During installation, lay product contents on cardboard or other protective surface to avoid any damage.
Improper installation or use of this product can result in damage to the product, other equipment, or personal
injury. It is recommended that installation to be performed by a qualified installer. ShowMeCables cannot be
held responsible for damage to equipment or personal injury resulting from improper use or installation of
product. If product is intended to store/ mount equipment, please ensure the equipment stored/ mounted does
not exceed the specified weight capacity. Install the heaviest equipment first and install it at the bottom of the
rack. Install equipment starting from the bottom of the rack and move upward.
Limitations of Liability: In no event will ShowMeCables be liable for any damages, whether direct or indirect,
special, punitive, incidental or consequential damages (including, but not limited to, lost profits or revenue,
loss of use, lost business opportunities or loss of goodwill) or for thecosts of procuring substitute products,
arising out of or in connection with the use of the product, whether such liability arises from any claim based
upon contract, warranty, tort (including negligence), product liability or otherwise, whether or not seller has
been advised of the possibilityof such loss or damage. In no event will seller's total cumulative liability, from
all causes of action and all theories of liability, exceed the total amounts actually paid to seller by customer
under the order that gives rise to any liability hereunder.
© 2022, ShowMeCables
www.showmecables.com
customerservice@showmecables.com
MN_SMC_VMRE_04/2022_R1.0

Advertisement

loading

Summary of Contents for Infinite Show Me SMCF2U400

  • Page 1 www.showmecables.com customerservice@showmecables.com Owner’s Manual: Vertical Wall Mount Rack Enclosure THIS MANUAL APPLIES TO THE FOLLOWING SKUs: SMCF2U400, SMCF2U600, SMCF2U700, SMCF3U500, SMCF3U400, SMCF3U600, SMCF3U700, SMCF4U500, SMCF4U900, SMCF4U400, SMCF4U600, SMCF4U700, SMCF5U400, SMCF5U600, SMCF5U700, SMCF6U500, SMCF6U900, SMCF6U400, SMCF6U600, SMCF6U700, SMCF8U500, SMCF8U900, SMCF8U400, SMCF8U600, SMCF8U700 Keep this information for further reference.
  • Page 2: Feature Identification

    1. Feature Identification Warning: Do not attempt to mount the rack on wall, when any equipment is mounted inside enclosure. Enclosure can hold up to 150 pounds. Before installation, make sure wall surface can hold weight of enclosure / equipment. Features for all other models are similar except the 2U, 3U &...
  • Page 3 2. Enclosure Configuration Door Locks 2U, 3U, 4U 5U, 6U, 8U The 2U series models have one lock on the side of the unit that can be secured with the included key. The 5U series models have locks on the front door and the top panel door that can be secured with the included keys.
  • Page 4: Top View

    3. Cable Access and Management Top View Top View Bottom View Bottom View 2U, 3U, 4U 5U, 6U, 8U The top and bottom panels of the enclosure both have circular cable access ports for convenient cable management. The tops of all models have three 1.75” ports and two 1” ports. The bottoms of 2U series models have two 1”...
  • Page 5: Reversing The Front Door

    Reversing The Front Door In order to accommodate various rack installations, the front door can be reversed by switching the configuration of the latch, lock and hinges. To reverse the door, simply remove the screws that secure the latch, lock and hinges to the enclosure.
  • Page 6: Adjusting Mounting Rail Depth

    Mounting Rails The enclosure comes with reversible horizontal mounting rails that have threaded holes for mounting rack equipment. The holes on one side of the rail are threaded for M6 hardware, while the holes on the other side are threaded for 12- 24 hardware.
  • Page 7: Optional Patch Panel Installation

    Optional Patch Panel Installation The unit comes with an integral, slide-out mounting bracket at the top of the enclosure. It can be used to secure a patch panel to the enclosure, and it partially slides out for easier cabling access. To install a patch panel on the patch panel mounting bracket, use the included mounting screws and washers to secure the equipment to the rack rail.

This manual is also suitable for:

Show me smcf2u600Show me smcf2u700Show me smcf3u500Show me smcf3u400Show me smcf3u600Show me smcf3u700 ... Show all