Advertisement
Quick Links
Advertisement
Related Manuals for Gemtech OASIS
Summary of Contents for Gemtech OASIS
- Page 1 TM-OASIS OPERATION AND MAINTENANCE OF SOUND SUPPRESSOR MODEL OASIS and OASIS-R Before using this suppressor, be certain you have read and understand this manual. Manufactured by GEMTECH Div. of Gemini Technologies, Inc. P.O. Box 140618 Boise, Idaho 83714 ISSUED: August 15, 2011...
- Page 2 It is of vital importance to re- member that a sound suppressed firearm is just as dangerous as a non-suppressed one, and the same safe handling require- ments apply. TM-OASIS FIRST EDITION August 2006 SECOND EDITION December 2006...
-
Page 3: Table Of Contents
OASIS Series OPERATIONAL MANUAL FOR SOUND SUPPRESSOR MODELS OASIS (MK-1, 2, 3) and OASIS-R (10/22 Rifle) Manufactured by GEMTECH Division of Gemini Technologies, Inc. P.O. Box 140618 Boise, Idaho 83714-0618 Phone: (208) 939-7222 FAX: (208) 939-7804 GEMTECH PROPRIETARY This document contains proprietary information of Gemtech and is submitted to the receiver in confidence. -
Page 4: General Description
The OASIS-R (Rifle) consists of a custom barrel assembly with a sup- pressor built integral to the front of the barrel similar to the OASIS pistol. The overall length of the suppressed barrel is shorter and lighter weight than the original non-suppressed barrel, and the diameter of 0.920 inch is... -
Page 5: Installation
The barrel is retained by two 3/16 inch hex cap screws. The Oasis-R barrel should be a snug hand fit and not require force. If necessary the shank may be lightly sanded with some 320 grit emery paper. When installing the new barrel, torque the cap screws to 30 inch-lbs. - Page 6 SOUND SUPPRESSOR MODEL OASIS Experience indicates that the preferred method of cleaning the suppres- sor is blowing it out with high pressure compressed air. While soaking in hydrocarbon-based solvents is acceptable, water-based cleaning agents must never be used. After use of any solvent, the suppressor should be thoroughly blown out with high pressure compressed air.
-
Page 7: Physical Specifications
Gemtech reserves the right to make changes at any time and without notice, in prices, to change specification or design, to add or remove accessory materials, and to add or delete items without incurring any obligation. - Page 8 All Gemtech products are 100% manufactured in the United States of America.