Pantone PT-BS00B1Y Quick Start Manual

BLUETOOTH SPEAKER
MODELS: PT-BS00B1Y, PT-BS00B1 P, PT-BS00B1 L, PT-BS00B1 N
PRODUCT OVERVIEW
C
l'"l----+-1
+
- - +-- 2
----+-3
- - - -4
...ii
M
�
:::::::: ,,,.:...
�
----
1. Power button: press and hold to turn the speaker on, Press and
hold again to turn the speaker off.
+ :
2. press to play the previous song, Press and hold to increase
the volume level.
3, - : press to play the next song, Press and hold to decrease
volume level.
.ii
4, : press to play/pause song,
5, M : press repeatedly to switch between the modes,
6. � : press to enter TWS mode.
7. LED light indicator
8. AUX port: use the supplied AUX cable to connect to an external
audio device.
9. DC IN : use the supplied USB-C cable to charge the speaker.
OPERATION
Power on and charging
Before first time use, charge the speaker using the supplied USB-C cable.
Plug the cable into the DC IN port on the speaker and the other end to a
power source. Charge for 4 hours. The LED light indicator will light up orange
during charging and will turn off once fully charged.
Press and hold the Power button for 3 seconds to turn the speaker on.
Bluetooth mode
When the speaker is turned on, it will automatically enter Bluetooth mode. The
LED light indicator will flash blue, indicating that the speaker is ready for pairing.
On your Bluetooth device, look for PT-8S0081 in the list of detected devices, and
pair with it. Once successfully paired, a notification sound will go off and the LED
light indicator stop flashing and light up green.
The speaker and your Bluetooth device will remember each other and
automatically connect when they are both turned on.
• Press the+l-buttons to play the previous or next song. You can also control
via your Bluetooth device.
.ii
• Press the button to play/pause the song. You can also control via your
Bluetooth device.
• To adjust the volume, press and hold the-button to decrease volume, press
and hold the+ button to increase the volume. You can also control via your
Bluetooth device.
Note: while music is playing in Bluetooth mode, the LED light indicator will light up
green and light off slowly. If the speakers are not connected to any Bluetooth
devices for more than 5 minutes, the speakers will automatically turn off.
PANTONE
--:5
s
6
- 1
0
+
---------;��-8
�----9
™