Pedestal fan
Thank you for purchasing this pedestal fan. Please read the instructions and warnings
carefully before using to ensure safe and satisfactory operation of this product.
Please retain this information for future reference.
Appliance components
1. Pedestal
7. Angle setting
2. Motor head
8. Adjustment knob
3. Fan blades
9. Securing screw
4. Carry handle
10. Neck
5. Speed controller
6. Oscillation button
10
Assembly
1.Fix the lower stand pole
2
2.Fix the air volume regulator
on to the base by use of
on top of the upper stand
the 4 screws provided,
pole by the 4 screws provided.
and then pit the upper
stand pole.
Screw
Spring washing
Washer
Operation
The fan needs to be self-assembled, please refer to assembly section.
The fan comes with three di erent speeds.
Swithc the fan on by turning the speed controller (5) back to 1, 2, 3.
To switch the fan o , turn speed controller (5) back to 0 (B1).
The fan comes with an additional oscillation function. Turn the oscillation function
on by pushing the oscillation button (6) down (B2).
Turn the oscillation function o by pulling the oscillation button (6) up (B2).
To change the angle of the fan, loosen the angle adjuster (7), then tilt the protective
screen up or down and nally retighten the angle adjuster (7) (B3).
The fan height can be adjusted by loosening the adjustment knob (8), Please hold the
neck (10) while doing so.
3