Logic Modal Table Assembly Instructions

680
R6
700
Quantity: --
Agreed Sub-base Material: --
REVISIONS
REV AMENDMENTS/ NOTE
- -
- -
- -
- -
All dimensions tolerance +/- 5mm
TOLERANCE:
Timber Disclaimer: All timbers lose a degree of tanning, some more than others. Timber in an external environment is susceptible to cracking, shelling and moving due to the natural drying process, this does not take away from the durability of the product. In time
timber may develop surface discolouration , this is caused by natural mould feeding on the tannins and should disperse as the timber dries and turns silver. Logic are not liable for this natural process and can not be held responsible for any of these natural processes.
All products to be installed in conjuntion with the supplied installation guide, following the steps & guidance. All Logic products will bear some form of company branding. VELOX Rapid Edge™ - Patent Pending - GB2016654.2 - Registered Design - 90082149100001
1980
100
Drawn SA
DATE Date 16/11/2022
--/--/-- Timber
Option Dependent
--/--/-- Metal Option Dependent
--/--/-- Finish
Option Dependent
--/--/-- LOGIC MANUFACTURED BESPOKE™
DO NOT
SCALE ALL RIGHTS RESERVED
DRAWINGS
80x80 timber
Pencil round
80
80
700
Lateral Support: --
Product
PM --
Modal Table
Project:
Weight
-- KG
680
20
Logic Manufacture Bespoke™
Project: 01642 373400 specification@logic-bespoke.com
--
DWG. NO.
XXXX-T03-A-001
REV
SIZE
--
A4