Panasonic PT-F300NTE Network Manual

Windows
(PT-F300NTU/PT-F300NTE/PT-F300NTEA)
(PT-FW300NTU/PT-FW300NTE/PT-FW300NTEA)
Installing the software and viewing the operating instructions
• Before installation, see "System requirements" at the upper right of this guide.
• Shut down all software currently active on Windows. Otherwise, installation may not be possible.
• Administrator authority is required for installation.
• If Wireless Manager mobile edition (henceforth abbreviated to "ME") 5.5 or an earlier version has been
installed, uninstall it. (See the bottom left of this guide.)
1 Set the supplied CD-ROM in the CD or DVD drive.
• The installer starts up automatically and
the screen at right appears.
• If the installer does not start up
automatically, double-click [EasyInstall]
→ [Easy_Inst.exe] in the CD-ROM.
2 Click a software or function name button.
[Wireless Manager ME 5.5]:
This software is used to send screen images from a computer to the projector via a wireless
or wired LAN. When installing this software, follow the instructions on the screen.
[Installation Free Set Up]:
Although some are impossible, you can use the basic functions of Wireless Manager ME 5.5
without installing it in the computer.
When using Wireless Manager ME 5.5 without copying the program
Click [Direct CD-ROM Startup] to launch Wireless Manager ME 5.5.
When copying Wireless Manager ME 5.5
(1) Click [Other Media Source Startup, Make Copy Here].
(2) Select the destination to save, and click [OK].
(3) Double-click the Wireless Manager ME 5.5 icon (WMstart.exe) in the destination to
launch Wireless Manager ME 5.5.
[Network Function Edition]:
The "Network Function Edition for Windows" and "Secondary Display Transmission
Function Advanced Operation" documents (operating manuals) are stored in the supplied
CD-ROM in PDF file form. To see them, Adobe Reader (URL: http://www.adobe.com/) is
required. Click on a desired document name on the displayed list.
ENGLISH 한국어
Using network functions
For details of usage, see "Network Function Edition for Windows" in the supplied CD-ROM.
● Easy wireless set up
1 Launch Wireless Manager ME 5.5.
When the user name setting window appears
Set the icon and user name, and click [OK].
• If the icon and user name have already been set, the setting window does not appear. Go to
step 2.
2 Select the projector that you want to connect to, and click
[Connect].
When the confirmation When the network adaptor
dialog window appears selection window appears
(1) Click [YES]. (1)
(2)
Click [ ] on the launcher.
3
Uninstalling Wireless Manager ME 5.5 or an earlier version
From the desktop, select [Start] → [All Programs] → [Panasonic Wireless Display] → [Uninstall
Wireless Manager mobile edition ※.※], and follow the instructions on the screen.
(※.※ is from 1.0 to 5.0.)
Network Function Quick Guide
TQDJ19122(En) S1008-0A
<Live mode>
Select the adaptor from the
list and click [OK].
If the confirmation dialog
window appears, click
[YES].
Used for normal presentations
:
●
System requirements
Microsoft Windows 2000 Professional SP4
Microsoft Windows XP Home Edition/XP Professional/XP Tablet PC Edition 2005
OS
Microsoft Windows Vista ®
Microsoft Windows Vista ®
® ®
Intel Pentium III 800 MHz or faster or compatible processor
CPU
(1 GHz or faster is recommended when using live mode)
RAM 256 MB
Empty hard
60 MB
disk capacity
Internet Explorer 6.0 or newer
Web browser
Netscape Communicator 7.0 or newer
Hardware CD or DVD drive
conditions Wireless or wired LAN function
An IEEE802.11 b/g built-in wireless LAN system or an IEEE802.11 b/g wireless LAN
adaptor must be installed and running properly. However, some IEEE802.11 b/g wireless
LAN may not allow connection to IEEE802.11 g projectors.
Wireless When your computer has no built-in wireless LAN function, a wireless LAN card driver
LAN must be installed and recognized properly.
If Network Bridge in Windows XP or firewall in Windows XP SP1 or later is enabled, this will
prevent a wireless connection. For details, see "Network Function Edition for Windows"
in the supplied CD-ROM.
A built-in LAN terminal (10BASE-T, 100BASE-TX or 1000BASE-T) or a wired LAN adaptor
must be running properly.
Wired LAN A LAN cable to connect must be compatible with category 5 or above (category 5e or
above when using 1000BASE-T). Consult your system administrator when selecting a
straight or crossover type.
When security (firewall) software and utilities for network cards are installed, these may
Other
prevent connection of the projector.
• Note that operation is not guaranteed when used with system environments other than the above or on
homemade computers.
• Operation is not guaranteed for all computers that meet the above conditions.
• Operation is not guaranteed for all wireless LAN cards and built-in wireless LAN adaptors.
• It is forbidden to take the projector outside the country or region where you purchased it, so use it only in
the said country or region. Also, note that depending on countries or regions there are restrictions on the
channels and frequencies at which you can use the wireless LAN.
• You must agree to the "Software Licensing Agreement" to use the supplied software. Please read it
carefully when it is displayed during installation.
URL : http : //panasonic.net/pavc/projector/
• Microsoft and its logo as well as Windows and Windows Vista
trademarks of Microsoft Corporation in the United States and/or other countries.
• Intel and Pentium are registered trademarks or trademarks of Intel Corporation or its affiliates in the United
States and other countries.
• Adobe Reader is a trademark of Adobe Systems Incorporated.
※The projectors illustrated as examples are PT-F300NTU.
●
Other examples of usage
<4-screen multi style> <4-screen index style>
<Multiple source live mode>
<Selective area transmission>
<Infrastructure mode (Connecting through the access point)>
<Using WebBrowser> <Using PJLink™ protocol>
See "Network Function Edition for Windows" in the supplied CD-ROM.
Ultimate 32 bit/Vista ® Business 32 bit
Home Premium 32 bit/Vista ® Home Basic 32 bit
®
are either registered trademarks or
<Multi live mode>
<16-screen index style>
The small-screen
layout is the example of
PT-F300NTU.
<Multiple source multi live mode>
<Secondary display transmission>
Screen before Screen after
operation operation
Moving the cursor outside the computer screen with the
mouse
LAN
Access point (AP)