Advertisement
Quick Links
GO Big Mount Installation Instructions
(K13-400,410, 420, 430)
Description:
The K-Edge GO BIG Mount series is designed for installation of a GoPro camera or GARMIN VIRB camera (with GARMIN supplied
adapter) to virtually any surface.
Compatibility:
The K13-400 GO BIG Adapter universal mount series is designed to attach a GoPro camera or GARMIN VIRB camera (with
GARMIN supplied adapter) to virtually any surface.
The K13-410 GO BIG Handlebar series is designed to attach a GoPro camera or GARMIN VIRB camera (with GARMIN supplied
adapter) to bicycle handlebars.
The K13-420 GO BIG Pro Handlebar series is designed to attach a GoPro camera or GARMIN VIRB camera (with GARMIN
supplied adapter) in front of bicycle handlebars, out of the way of your hands and your vision.
The K13-430 GO BIG Pro Saddle Rail series is designed to attach a GoPro camera or GARMIN VIRB camera (with GARMIN
supplied adapter) to rails underneath a bicycle saddle.
Warnings:
These instructions are generalized to accommodate a wide ranges of setups for a bike. If your setup does not match what is being
described, take extra care in the process of your setup and contact K-Edge Support if you have any questions.
Improper installation of any K-Edge product or use outside of its design intentions could lead not only to damaging the bike but could
also cause personal injury to the rider.
Advertisement
Summary of Contents for K-Edge K13-400
- Page 1 K-Edge Support if you have any questions. Improper installation of any K-Edge product or use outside of its design intentions could lead not only to damaging the bike but could...
-
Page 2: Parts Included
1x M5 x 16mm flat head bolt Tools/Items Required: Metric Allen Set (3mm for clamp bolt and 4mm for mounting bolt) Torque wrench Note: (Applies to: K13-400/410/420/430/460) Prior to installation please ensure that the camera mounting bolt is installed correctly. -
Page 3: Installation Steps
Installation Steps: K13-400: Position the adapter to any flat surface for “optimal” camera placement. (Mounting bolts not included) Attach camera to adapter in the desired direction. Torque camera mounting bolt to 2-3 N-m. See image below:... - Page 4 K13-410: Place the clamp on compatible 31.8mm diameter handlebars to the desired location (clamp separation may be necessary). Torque the clamp bolts to 2 N-m, maintaining equal spacing between clamp halves to ensure the bolts are evenly torqued. Attach camera to the adapter in the desired direction. (Towards rider or terrain) Torque camera mounting bolt to 2-3 N-m.
- Page 5 K13-420: Place the clamp on compatible 31.8mm diameter handlebars to the desired location (clamp separation may be necessary). Torque the clamp bolts to 2 N-m, maintaining equal spacing between clamp halves to ensure the bolts are evenly torqued. Attach camera to the adapter in the desired direction. Torque camera mounting bolt to 2-3 N-m.
- Page 6 K13-430 Note: If the saddle bolts on the K13-430 do not have thread lock applied to threads, it is strongly recommended that 'temporary' thread lock be applied to these threads. Attach the saddle mount to the rails underneath the saddle. Equally torque the bolts to 4 N-m.
-
Page 7: Troubleshooting
If problem(s) still persist after troubleshooting, please contact K-Edge Support for further assistance at info@K-Edge.com immediately. Please be sure to include your full name, phone number, K-Edge product purchased, brand and model of bike, crankset with ring sizes, front derailleur, cassette size (if applicable), rear derailleur (if applicable) and a brief description of your...