Page 1
K-Edge Support if you have any questions. Improper installation of any K-Edge product or use outside of its design intentions could lead not only to damaging the bike but could...
1x M5 x 16mm flat head bolt Tools/Items Required: Metric Allen Set (3mm for clamp bolt and 4mm for mounting bolt) Torque wrench Note: (Applies to: K13-400/410/420/430/460) Prior to installation please ensure that the camera mounting bolt is installed correctly.
Installation Steps: K13-400: Position the adapter to any flat surface for “optimal” camera placement. (Mounting bolts not included) Attach camera to adapter in the desired direction. Torque camera mounting bolt to 2-3 N-m. See image below:...
Page 4
K13-410: Place the clamp on compatible 31.8mm diameter handlebars to the desired location (clamp separation may be necessary). Torque the clamp bolts to 2 N-m, maintaining equal spacing between clamp halves to ensure the bolts are evenly torqued. Attach camera to the adapter in the desired direction. (Towards rider or terrain) Torque camera mounting bolt to 2-3 N-m.
Page 5
K13-420: Place the clamp on compatible 31.8mm diameter handlebars to the desired location (clamp separation may be necessary). Torque the clamp bolts to 2 N-m, maintaining equal spacing between clamp halves to ensure the bolts are evenly torqued. Attach camera to the adapter in the desired direction. Torque camera mounting bolt to 2-3 N-m.
Page 6
K13-430 Note: If the saddle bolts on the K13-430 do not have thread lock applied to threads, it is strongly recommended that 'temporary' thread lock be applied to these threads. Attach the saddle mount to the rails underneath the saddle. Equally torque the bolts to 4 N-m.
If problem(s) still persist after troubleshooting, please contact K-Edge Support for further assistance at info@K-Edge.com immediately. Please be sure to include your full name, phone number, K-Edge product purchased, brand and model of bike, crankset with ring sizes, front derailleur, cassette size (if applicable), rear derailleur (if applicable) and a brief description of your...