Qubo MICRO MINI MEDIUM MAXI HP Assembly And Operating Instructions

ASSEMBLY AND OPERATING INSTRUCTIONS:
-Class I fitting electric grounding is needed
-COD 101605
-COD 101606
-COD 101607
-Replace the damaged protective glass
-Getting rid of as urban waste forbidden
-Separate collection is mandatory when the product is at the
end of its life
-Electronic equipment sensitive to voltage surges.
The installation of a protective device against
overvoltages on the electrical system attenuates
the
phenomena protecting apparatus from the risk of
damage.
NB: These assembly instructions must be given to end users for correct maintenance and so that they know how to change the bulb.
The appliance must not be tampered with or transformed and it must be installed and used as supplied and in compliance with the
National Rules on Installations. Any non-compliant installations will invalidate all forms of guarantee. The company cannot be held
COD. 101601
COD. 101605
Retain the instructions
protection class III
products that can only be operated with protec-
ted extra-low voltage
-COD 101601
Made in Italy
IP66
The article is suitable for indoor and
outdoor use
Do not use high pressure cleaners
QUBO MCRO HP
-Power consumption : 6W
-Voltage : 220-240V 50-60Hz
-Color Temperature : 3000K - 4000K
-Beam angle : 4°-10-28°
-Insulation class: III
-IK rating : IK10
-IP protection: IP66
-Gross weight: 0.7kg
QUBO MINI HP
-Power consumption : 8W
-Voltage : 220-240V 50-60Hz
-Color Temperature : 3000K - 4000K
-Beam angle : 4°-10°-28°
-Insulation class: I
-IK rating : IK10
-IP protection: IP66
-Gross weight: 1.3kg
-COD. 101601
-COD. 101605
-COD. 101606
-COD. 101607
IK10