Contents Using assembly and operating instructions Observing basic rules Understanding and heeding warnings Observing useful hints Observing the appropriate document Using the front blind correctly Assembly Finished Disassembly Cleaning and care ...
Using Assembly and operating instructions Observing basic rules Before assembling and using the "product name" product: Read this manual "document type" carefully and fully. Ask the manufacturer if there is something you do not understand. Keep the manual close at hand. If you are not sure about a work step, consult the manual.
Using the front blind correctly The front blind is a supplement to the Professional livecookintable. It covers the front of the table. Any other use is contrary to the intended use. Assembly Aax0226a.eps.jpg Aax0227a.eps.jpg Finished Aax0253a.eps.jpg...
Disassembly Aax0257a.eps.jpg Cleaning and care Clean the front blind after every use. Dry the front blind after cleaning. Work material Soft sponges, cloths Cleaning agents Soap, detergent, commercially available glass cleaners Disposal At the end of the life cycle: Dispose of the front blind according to regional regulations. The front blind is made of PETG.
Technical data Front blinds for frame size no. 4 Art. No. Usage Thick- Article Length Height ness Weight 13234 Front blind SET 4 Airwall 1,466 mm 520 mm 3.6 kg 13224 Front blind SET 4 1,466 mm 789 mm 5.6 kg...
Page 7
Sales MEC2 GmbH Grossglocknerstrasse 17 D 65199 Wiesbaden Phone +49 (0) 611 5659-100 E-mail info@mec2.de Internet www.mec2.de Copyright 2013 MEC2 GmbH This document is protected by copy- right and may not be reproduced or published without written permission. Subject to change Subject to technical modifications.