Liquid Ears LEBSFBK How To Use

WIRELESS
EARPHONES
LEBSFBK, LEBSFLG, LEBSFRG
Specifications:
Driver Size: 10mm
Impedance: 32 Ohm ±15%
Sensitivity: 93dB ± 3dB at 1kHz
Frequency Response: 20Hz - 20kHz
Wireless Range: 10m
Play Time: 4 Hours
Battery Size: 55mAh
Charge Time: 2 Hours
Battery Charge:
This Wireless Earphone is powered by a rechargeable Li-ion battery.
When the battery is low the earphones will emit a sound to remind you to recharge it.
1. Insert USB charging cable into a suitable USB port for charging.
2. Connect the USB charging cable with the Micro USB port to the earphone.
3. The LED indicator turns red to show battery is charging.
4. The LED indicator turns off when battery is fully charged.
5. It takes about 2 hours to fully charge the earphone.
How to use this Earphone:
A. Power ON/OFF
Function Operation
Power ON Press and hold the power
button (1) for 3 seconds
Power OFF Press and hold the power
button (1) for 3 seconds
B. Pairing the Earphone
1. To enter pairing mode ensure earphone is OFF. To ensure the earphones are ready for pairing, press
and hold the power button (1) for 5 seconds until the LED indicator flashes blue and red, and
an audio tone can be heard.
2. On your device, search for the pairing name: LE Secure Fit.
Once connected a single tone can be heard for successful pairing.
Included:
1 x Wireless Earphone
1 x USB to Micro USB Charging Cable
2 x Small Ear Cushions
2 x Medium Ear Cushions
2 x Large Ear Cushions
LED indicator
LED indicator turns blue and the earphone
plays an audio tone for power on mode
LED indicator flashes red, then goes out
and earphone plays an audio tone for power
off mode