Advertisement
Quick Links
PACKAGE CONTENTS
HARDWARE CONTENTS Note: Hardware not shown actual size.
Wire Nuts
x3
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
• Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off
circuit breaker).
• Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any
surface having a sharp edge. To do so may damage or cut the wire insulation, which could cause serious injury or death
from electric shock.
CAUTION
• All electrical connections must be in agreement with local codes, ordinances or the national electric code (NEC). Contact
your municipal building department to learn about your local codes, permits and/or inspections.
Questions, problems, missing parts?
Before returning to your retailer, call our customer service at 1-833-390-5533 Monday
– Friday 8:00 a.m. – 5:00 p.m. CST
Mounting Screw
x2
18" Color Selectable Closet Light
Model Number: LEDUC-E18-FS
CC
Cord Connector
x1
Sku Number: 348-2171
DD
J-Box Screws
x2
1
Advertisement
Related Manuals for Patriot Lighting LEDUC-E18-FS
Summary of Contents for Patriot Lighting LEDUC-E18-FS
- Page 1 Sku Number: 348-2171 18" Color Selectable Closet Light Model Number: LEDUC-E18-FS Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-833-390-5533 Monday – Friday 8:00 a.m. – 5:00 p.m. CST PACKAGE CONTENTS HARDWARE CONTENTS Note: Hardware not shown actual size.
- Page 2 SAFETY INFORMATION (cont) • Luminaire is suitable for installation within a clothes closet storage space • Risk of fire – most dwellings built before 1985 have supply wire rated for 140°F/60ºC. Consult a qualified electrician before installation. • Do not connect this fixture to an electrical system that does not provide a means for equipment grounding. Never use a fixture in a two-wire system that is not grounded.
- Page 3 MOUNTING INSTRUCTIONS • Remove the lens by carefully pressing in at the bottom of the lens, and then pulling the lens up and off. • Remove the LED driver cover by pressing at the bottom of the cover, and releasing the cover from the slots in the luminaire housing.
- Page 4 MOUNTING INSTRUCTIONS (continued) • Reattach the driver cover assembly to the luminaire housing by positioning the driver cover assembly in the correct position, and then pressing the cover back until it is retained by the slots. Be sure not to pinch any wires under the cover.