Summary of Contents for KCT GWB322
- Page 1 GWB322 | GWB333 160/200L Twin Wheel Barrow User instructions - Please keep for future reference V2.0 IMPORTANT - Ensure all bolts are secured tightly before use.
- Page 2 GWB322 | GWB333 160/200L Twin Wheel Barrow User instructions - Please keep for future reference Imported by: Plastic Base Axle 10X - 75mm Nuts, Washer, KCT Leisure Glebe Farm, Old London Spring Washer & Bolts Road, Copdock, Ipswich, 2X - Arms...
- Page 3 Step 1 Align arms (2) onto the plastic base with the handles towards to back end. Place the legs on top of the arms esuring the leg brace holes face the rear of the base. Align all the bolt holes and secure both the legs and arms to the plastic base using four 75mm (11) nuts and bolts.
- Page 4 Step 4 Secure in place using the wheel washer first (13) and then the split pin (14). Insert the split pin into the holes shown and split the two sides of the pin where it exits. Repeat for other wheel. Step 5 Place the leg brace (4) onto the back side of the legs.