Advertisement
Quick Links
Advertisement
Summary of Contents for SafeGuard SLT-600
- Page 1 USER GUIDE www.safeguardnet.com.au...
- Page 2 Eyelet for additional attachment of net Loop Tab anchoring points 38mm Heavy-duty Triple layered - adding straps increases net Heavy-duty mesh rip-stop reinforced capacity. Number of anchor webbing rated fabric rated edges points varies with net size at 544Kg/2.6cm at 544Kg/2.6cm Included Hardware Set Straps with Hook &...
-
Page 3: Intended Use
The Safeguard Net is designed to contain most loads if the vehicle is in a collision, where small and large items could be dislodged. It reduces cargo related accidents, driver liability, unnecessary risk and potential lawsuits. - Page 4 Safety should always come first. Remove Safeguard Net from the storage bag. 2) Position the Safeguard Net over your load like a blanket. Attach the Quick Snap Karabiner to the Loop Tab on the outer or inner perimeter of the Safeguard Net.
- Page 5 Pull the cam buckle straps tight to secure the load snugly. Tuck in any excess netting into tray sides. LOAD COVERED AND SECURED The Cam Buckle - Press the buckle when you need to loosen it, and it will slide freely along the strap.
- Page 6 WARNING OVERLOADING Webbing restraint systems should not be overloaded, by using mechanical aids such as levers or bars (cheater bars) unless they are designed for use with the webbing restraint system. STABILITY OF LOAD Care should be taken to ensure that the stability of the load is independent of the webbing restraint system and that the release of the webbing restraint system will not cause the load to shift, thus endangering personnel.
-
Page 7: Maintenance
(D) Any damaged webbing restraint system which cannot be repaired should be destroyed. SAFEGUARD NETS LOAD CAPACITY 1000kg with 6 straps 500kg with 4 straps attached. (Only on certain models - refer to each model label for... - Page 8 CONTACT US PO Box 5420 Bundaberg West QLD 4670 1800 20 88 66 sales@activetrade.com.au www.safeguardnet.com.au...