Haneco PANNELLO-LV Installation Manual

HANECO LIGHTING LED PANEL INSTALLATION GUIDE
WARNING
Thanks for choosing our PANNELLO LED troffer.
We strongly recommend that you read this installation guide carefully before installation.
Product Specifications
PRODUCT CODE
PANNELLO-LV
PANNELLO-LV-AR
Dimensions
1195
PANNELLO-LV
Installation Instructions
For ceiling embedded installation
1. Remove existing decorative ceiling
board where the desired installation
will be.
V23112022
PANNELLO
The luminaire must be installed by a professional electrician. Switch power off prior to installation. Ensure input voltage
conforms to the voltage range of product. Ensure wires are securely connected. Before switching on, ensure that all
the wiring is correct. The warranty is void if product is not installed according to the below instructions.
Please read these instructions carefully before using this product and keep for future reference.
SAP CODE
2001975 Tritone + Power
2001976
47.5
mm
2. Toggle the dip switch at the back
of the luminaire to the required
colour temperature setting, and then
connect the input and output power
cord properly.
For more information
www.haneco.com.au
1300 001 LED (533)
FEATURE CCT
3000K
4000K
Switchable
5000K
mm
3. Put the luminaire in place.
POWER LUMEN
2760lm
26W 2910lm
2870lm
3330lm
32W 3560lm
3470lm
3630lm
36W 3900lm
3810lm
3820lm
40W 4090lm
3950lm
1195
mm
PANNELLO-LV-AR
4. Installation is now complete.
NET
WEIGHT
5.3kg
47.5
mm
PAGE 1