Inbal Deluge Valve, Hydraulic Actuation
Series 700D/DG/DX - 04/24A01
F M
A p p r o v e d
General Description
The Inbal Deluge Valve with Hydraulic Actuation Trim is
specifically designed for fire protection systems actuated by
a fire detection and release system of wet pilot sprinklers
and/or hydraulic manual control. The Inbal Automatic Water
Control Valve, which is used in this deluge system, is a
pressure operated, sleeve actuated, axial valve designed
for use in fire protection systems.
The Inbal Hydraulically actuated Deluge Valve is used for
automatic or manual operation. The wet pilot line functions
as a thermal detector equipped with a fixed temperature
release. When one or more of the sprinkler heads, located
on the pilot line, fuses, or when a manual release station is
operated locally or remotely, the Inbal Deluge Valve opens
and water flows from all open sprinklers and/or nozzles on
the system. As soon as the releasing system and the
sprinkler piping are reset, the Inbal Deluge Valve resetting is
merely done by activating the reset knob.
Page 1/6
Local Resetting
The control trim includes all the pilot valves, accessories,
fittings, and gauges to provide for proper operation in either
vertical or horizontal installation. The standard material
Inbal Deluge Valve is rated to 300 psi (21 bar) and is
available in sizes 1½" (40 mm) to 12" (300 mm). The valves
have threaded, flanged, grooved, or wafer inlet and outlet
ends.
The only moving part in the Inbal Deluge Valve, when it
operates, is the reinforced sleeve, which forms a drip-tight
seal with the corrosion resistant core. It has a smooth
opening to prevent any water hammer in the piping system.
The unique design and variety of materials and coatings
make the Inbal Deluge Valve ideally suitable for use in
brackish or sea water, similar to those found in chemical and
petrochemical facilities or in offshore platforms. The Inbal
can also be used as a foam concentrate control valve in
foam/water systems.
F03-02-04-001
®
Model 799DG-04A01