Page 1
This manual applies to the Hi-Force HTW Industrial manual torque wrenches. It contains the latest product information available at the time of publication and approval. Hi-Force reserves the right to make changes to this document at any time without notice.
Failure to do so could lead to equipment damage, equipment failure, personal injury or even death. Hi-Force will not be held responsible for any damage to the equipment, injury or death resulting from the unsafe use of, lack of maintenance too, or incorrect operation of the product. If in doubt on the correct use of any Hi-Force equipment, contact your nearest Hi-Force office or distributor.
Operating Instruction Manual: Serial Numbers: OM-HTW-01 FROM 79107887695 6.2 Setting the Torque Turn the nut on the end of the torque wrench handle until the required setting aligns with the end of the handle tube. HTW1000B HTW1500B HTW2000B HTW1800B Never adjust beyond the marked scale or else calibration will be lost. On the HTW2000B model there are two adjustment nuts.
Do not snatch the wrench away from 90º to the axis of the bolt when tightening. For full and comprehensive details on this piece of equipment and all the Hi- Force range of torque & tension bolting tools please go to: www.hi-force.com...
Page 7
Operating Instruction Manual: Serial Numbers: OM-HTW-01 FROM 79107887695 Head Office: Hi-Force Limited Prospect Way, Daventry Northamptonshire NN11 8PL United Kingdom Tel: + 44 1327 301000 | Fax: + 44 1327 706555 www.hi-force.com Regional Offices: For information on our offices worldwide, scan the below QR code...