barkman Belvedere Quick Start Manual

Barkman Landscape Kits
Belvedere Pillar Kit
Base Preparation
If installing your Barkman Belvedere Pillar Kit on an unstructured base, please ensure to follow these steps:
• Excavate area approx. 9 inches below grade.
• Excavate approx. 6 inches larger than your actual kit dimensions to ensure a stable base.
• Fill with ¾ inch down limestone and compact firmly. Level out ½ inch of sand and install kit as per the instruction guide.
• If you are installing on a solid base such as an existing patio and/or base prep is not necessary, then you can proceed below.
Instructions
1
■ Place four 3" or 6" high corner blocks with the taper
facing into the center of the pillar.
3" high
6" high
3
■ Continue with subsequent rows to the desired pillar
height.
■ One pallet of corner blocks will make a 24" x 24" x 36" high
column.
05-2021
1.1
2
■ Place the second row of four of the corner blocks with the
taper facing into the center of the pillar.
■ Build the first row with 6" corner blocks and the second row
with 3" corner blocks.
24"
24"
4
■ Place a column cap to finish the pillar.
127594