Safety Warning
•
The installation should be carried out
by a qualified electrician in compliance
with the current edition of the IEE
Wiring Regulations.
•
Prior to installation, carry out the
necessary risk assessment considering
the people who could be at risk,
the level of risk and the precautions
required to control the risk
•
Ensure that the circuit supply is
isolated either by the circuit supply
fuse being removed or the applicable
Specification
Box Contents -
1 x Jupiter Floodlight and mounting bracket
JUPS30-40/JUPS30PC-40 L: 257 x W: 247 x D: 50mm. Weight: 1.3kg
JUPS50-40/JUPS50PC-40 L: 257 x W: 247 x D: 50mm. Weight: 1.4kg
JUPS100-40/JUPS100PC-40 L: 325 x W: 236 x D: 48mm. Weight: 1.8kg
Dimensions:
JUPS135-40/JUPS135PC-40 L: 345 x W: 285 x D: 55mm. Weight: 2.2kg
JUPS180-40/JUPS180PC-40 L: 395 x W: 320 x D: 78mm. Weight: 3.2kg
JUPS240-40/JUPS240PC-40 L: 480 x W: 374 x D: 78mm. Weight: 4.2kg
JUPS320-40/JUPS320PC-40 L: 555 x W: 425 x D: 78mm. Weight: 5.6kg
Body: Die-Cast Aluminium
Material:
Lens: Tempered Glass
Working
-30°C - 45°C
Temperature:
30-
110-
320
277V
WATT
Installation Instructions
Note: This is a Class I Luminaire - Earth connection is required
1.
Isolate the mains supply before commencing the installation.
2.
Ensure there is adequate free air circulation of at least 100mm around the luminaire. All luminaires run hot. It is the installer's responsibility to consider any
fire risks and take appropriate precautions.
3.
The nearest illuminated surface must be at least 0.5m from the front of the fitting.
4.
Do not install or use if the glass is broken. Replace the luminaire.
5.
Select a suitable, solid mounting surface and fixings that are capable of holding the weight of the luminaire.
INSTALLATION INSTRUCTIONS
Jupiter Floodlights
Product Codes: JUPS30-40, JUPS50-40, JUPS100-40, JUPS135-40, JUPS180-40, JUPS240-40,
JUPS320-40, JUPS30PC-40, JUPS50PC-40, JUPS100PC-40, JUPS135PC-40, JUPS180PC-40,
JUPS240PC-40, JUPS320PC-40
LED
4000K
circuit breaker being turned off before
installation or any maintenance.
•
Check the total load on the circuit
ensuring the luminaire does not exceed
the rating of the circuit cable, fuse or
circuit breaker.
•
Long-term use and voltage fluctuations
can reduce the life span of the fitting.
•
If the fitting incorporates control gear,
ensure careful sizing to avoid instances
of nuisance tripping of the protective
device used in the installation.
IP65
4200-
44800LM
•
Follow the provided installation
instructions, using the fixings supplied
or recommended.
•
Keep out of reach of children.
Wmm
5
IK07
YRS
GUARANTEE
Lmm
Dmm