Orbital Shaker Mounting Kit
An Orbital Shaker mounting plate is used to mount an Orbital Shaker on the locator plate of a
GX-281 Liquid Handler.
The Orbital Shaker Mounting Kit for the GX-281 Liquid Handler includes the following:
•
Mounting plate, left, for a GX-281 Liquid Handler
•
Mounting plate, right, for a GX-281 Liquid Handler
•
4/40 x 1/4 Flat Head SS Screw (3)
•
8-32 x 1/4 Truss Head SS Machine Screw (2)
Attaching the Orbital Shaker Mounting Plate to the Orbital Shaker
To attach the Orbital Shaker mounting plate to the Orbital Shaker, refer to the diagrams and
instructions below:
1
Determine where you will be placing the Orbital Shaker on the liquid handler (left or right
side) and locate the appropriate Orbital Shaker mounting plate. Each plate is marked with
either an "L" or an "R" near the top front of the plate.
Orbital Shaker installed on the LEFT side
of a GX-281 Liquid Handler
Phone: 608-836-1551 • Fax: 608-831-4451 • E-mail: sales@gilson.com, service@gilson.com, training@gilson.com • www.gilson.com
Gilson S.A.S. • 19, avenue des Entrepreneurs, F-95400 VILLIERS LE BEL France
©2005 Gilson, Inc. All rights reserved
GX-281 Liquid Handler
(Part Number 264977)
Gilson, Inc. World Headquarters • Middleton, WI 53562 USA
Orbital Shaker installed on the RIGHT side
of a GX-281 Liquid Handler
LT319227-02