Weathermatic Smartlink SL-AIRCARD-M1NA Installation Instructions

Commercial Wireless
Installation Instructions for the following models:
• SL-AIRCARD-M1NA
• SL-AIRCARD-M1NA-EXT
• SL-AIRCARDFLOW-M1NA-EXT
• SL-AIRCARDFLOW-M1NA
Step 1: Installing the Aircard
1. Verify the version of
SmartLine controller is
compatible through the
Advanced menu. Only
versions 3.1 and higher are
compatible.
2. Remove the SmartLink
Aircard , accessory bag
containing screws, and
antenna from the box. On
the outside of the box and
Aircard is a label with the
Aircard 19 digit ID number.
You will need this to activate and register your Aircard
on the SmartLink Network.
3. Screw the antenna into the Aircard.
4. Run the Aircard cable up through the bottom of the
SmartLine controller case. You may need to widen an
existing hole using a drill or punch out the area indicated
on the bottom.
5. Plug the cable into the RJ-11 phone jack located inside
the controller. Ensure it is plugged in completely.
6. Verify all of the cables are out of the way and close the
panel door, ensuring it is closed completely.
7. The Aircard status LED will flash rapidly green until
it cycles through the 4 status positions. This will last
approximately 15-30 seconds.
8. If you have not yet activated and registered your Aircard,
see Step 2 – Setting up your SmartLink Network Account
to activate. You will need the 19-digit ID number.
9. If you have powered up the Aircard, the Aircard
status will be a solid green light once it establishes
communication. If, after activation on the SmartLink
Network, the status flashes red, please contact the Help
Desk.
10. Complete the installation by mounting the Aircard using
the screws provided in your accessory bag. The antenna
should face down.
Step 2: Setting Up Your SmartLink Network Account
1. Go to www.smartlinknetwork.com and click the "Login"
*SmartLink is supported by the latest version of the most popular internet
browsers: Internet Explorer, Firefox, Chrome, and Safari. We recommend you
update your internet browser to the latest version to be sure of compatibility. For
example, Internet Explorer version 8 and higher is supported (version 7 and lower
is not). Go to the Help menu item – About Internet Explorer to see your browser
version number.
SL-AIRCARD SmartLink Aircard
2.
3.
LTE LTE
4.
5.
6.
7.
Installation Instructions
button at the top right of the screen. There you can login
to an existing account or create a new one. If you already
have an account, continue to Step 2. When creating a
new account, please fill out all required areas marked
with an asterisk (*). Note: Company Name is required. If
creating a personal account, use your name in place of
the company name.
Once logged in, you will be taken to the Sites page.
To add a new site, select the "+ New Site" button at the
top of the Site page.
Enter the Site name and complete address.
Select the Save button.
In the selected site, select the "New Controller" button to
activate your Aircard.
Enter a name to identify the SmartLine controller to
which the Aircard will be connected.
www.weathermatic.com
1
ADSLAC_revD