Cembre CBL06 Operation And Maintenance Manual

HIGH BRIGHTNESS RECHARGEABLE LED LAMP
LAMPADA LED RICARICABILE AD ALTA LUMINOSITA'
CBL06 CBL06A CBL06E
EN
OPERATION AND MAINTENANCE MANUAL
Before using the device, carefully read the instructions
contained in this manual.
SAVE THESE INSTRUCTIONS: this manual contains
important safety and operating instructions.
Do not turn on or point the lamp to people or animals,
the intense brightness may damage your eyesight.
DANGER of eye injury!
Magnet can erase data storage devices.
Keep a minimum distance of 0.1m from the LED area,
THE LAMP MAY GET HOT!
Never directly place the LED in contact with any surface
to avoid dangerus overheating.
1. Technical specifications
Nominal power
Luminous flux
Operating time
Colour temperature
Operating temperature
Protection class
Impact resistance
Ingress protection
Charging time
Rechargeable battery
Weight
Lamp INPUT
USB OUTPUT
Battery charger (*)
(*) fitted with plug: EU (CBL06) US (CBL06A) UK (CBL06E)
20 W (COB)
2000 lm (100 %) 1000 lm (50%)
3,5 h (100 %) 5,5 h (50%)
5700 K
- 10°C ~ + 40°C
III
IK 08
IP 65
~ 5 h
Li-poly 11.1 V ; 4000 mAh
800 g
5 V 3 A (USB type C)
5 V 1 A
input 100 - 240 V 50/60 Hz
2. Proper use
For universal use, the diffused light emitted allows to efficien-
tly illuminate rooms and usual work areas where a wide and
powerful light beam is required.
With a USB cable it is possible to use the lamp as a powerbank
using the powerful battery to charge small devices.
3. Charging operation
When using for the first time, fully charge the lamp:
- Remove the protective cap and connect the cable of the char-
ger supplied to the USB-C socket, then connect the charger.
Check the charging process through the lamp indicator.
- LED flashing: charging in progress.
- RED LED on: low battery.
- 3 GREEN LEDs on: battery fully charged.
- When charging is complete, disconnect the battery charger
and return the protective cap to its original position.
4. Use
Press the ON / OFF button:
- 1 click: minimum lighting 50%.
- 2 clicks: maximum lighting 100%.
- 3 clicks: turn OFF.
The lamp can be placed on a flat surface or also hanging on
hook.
The moveable base allows to tilt the lamp to obtain the best
direction of the luminous flux.
In the lower part of the moveable base there are inserted a
series of magnets that allow adhesion to a metal surface.
Powerbank function: connect the device to be charged to the
OUTPUT (USB) socket and press the white button to activate
charging.
5. Safety notes
- Use the supplied battery charger only.
- Do not use the lamp or battery charger if damaged.
- Never directly place the LED in contact with a surface even
during the charging phase.
- Do not use the lamp in explosive environment in which flam-
mable liquids, gases or dusts are present. Risk to life!
- Not suitable for children, not a toy! Responsible use prevents
eyes problems or accidents.
- Do not look directly at the illuminating led, make sure that
nobody gets dazzled.
6. Maintenance
Do not disassemble or modify the lamp.
Failure to follow the instructions could result in electric shock
or injury.
Do not use solvents, corrosive cleaners or similar.
Use dry or slightly moist cloth for cleaning ONLY.
7. Disposal
Dispose of electrical devices in an environmentally respon-
sible manner! Do not dispose of electrical devices with hou-
sehold rubbish, please contact your local authorities for avai-
lable disposal options.
USER INFORMATION in accordance with "Directives 2011/65/
EU and 2012/19/EU.
The 'Not in the bin' symbol above when shown on
equipment or packaging means that the equip-
ment must, at the end of its life, be disposed of
separately from other waste. Unlawful disposal of
such equipment will be subject to application of
administrative sanctions provided by the current
legislation.
Made in China
Address / Indirizzo: Cembre S.p.A.
via Serenissima, 9 25135 - Brescia (Italy)
imported in the UK by CEMBRE Ltd, Curdworth, B76 9EB. UK
www.cembre.com 20M201I/E rev3