Download Print this page

JADEMAR LIGHTING JSLCT-SOL Series Installation Instructions

Advertisement

Quick Links

J
SLC
T-SOL SERIES
OFF-GRID SOLAR SIGN LIGHT
INSTALLATION REQUIREMENTS
WARNING:
Please read these instruc ons before installa on to ensure op mum results and longevity of your lights. The solar panel should be charged in full sunlight for 6 to 8
hours before first use to obtain op mum results.
1.0 PACKAGE CONTENTS
1.
Solar Panel and Ba ery box with LED array (1 pcs)
2.
Wall brackets (2 pcs)
3.
Instruc on sheet (1 pcs)
2.0 APPLICATIONS
Sculpture/Memorial
Billboard/sign
Pathway
Sign boards
Wall washer
Garden feature
Commercial product
3.0 FEATURES
Easy installa on- no electrical wiring required with integrated design.
Turns on automa cally at night and off during the day.
The lights include an On/Off switch and built in ba ery.
Ba ery can support 2-3 nights with cloudy days.
When the ba ery is full charged in sunlight, the lights will operate up to 3 nights.
Intelligent power saving mode increases ligh ng x 1.5 mes.
IP65 water and dust resistance.
4.0 HOW THE SOLAR PANEL WORKS
During the day, the solar panel converts sunlight into electricity to charge the ba ery. At night, the lights turn ON automa cally using the electricity stored in the
ba ery. The performance of the solar lights is dependent on the loca on of the solar panel and/ or weather condi ons. Install the solar panel in a sunny posi on
ensuring it receives 6-8 hours sunlight each day. Reduced sunlight will reduce con nuous working hours at night.
Please note: during con nuous wet & overcast days, ligh ng me may be reduced as the ba ery will not be fully charged. The lights may stop working during
longer rainy periods of more than 5 days & will return to normal func on when the sun returns. A er an extended period of poor weather restore the ba ery
power by turning the unit off and, fully charge the ba ery for 8 hours in full sunlight.
5.0 PRODUCT PARAMETERS
Solar Panel Po
LED Po
Chargin Time
LED Color
LED Life Time
Product Size
Beam Angle
Work Mode
Miami, FL USA - info@jademar.com
T: 305.640.0465 - F: 305.640.0468
WWW.JADEMAR.COM
INSTALLATION INSTRUCTIONS
Risk of electric shock and serious injury. SHUT OFF BREAKER AT PANEL BEFORE INSTALLING.
Model-3
1
we
r
5.5V 4.5W
Bat ery
t
3.7V 8800mAh
we
r
5W
g
300*95*95mm
Material
Con roller
t
Revised
Page of
Model-90
Model-120
Model-6
0
Model-90
5.5V 9W
5.5V 13W
3.7V 17600mAh
3.7V 26400mAh
10W
15W
8-9 Hou s(10
r
00W/ ㎡ )
Warm white/Natural white/Cool white
> 50000 Hours
600*95*95mm
900*95*95mm
120 Degree
Aluminum Alloy+PC
Sunshine Control Automatic
4 hrs full bright + 25% brightness dim till dawn
01
/20
22
1
3
Model-31
Model-60
Model-120
5.5V 17W
3.7V 35200mAh
20W
1200*95*95mm

Advertisement

loading

Summary of Contents for JADEMAR LIGHTING JSLCT-SOL Series

  • Page 1 INSTALLATION INSTRUCTIONS T-SOL SERIES OFF-GRID SOLAR SIGN LIGHT INSTALLATION REQUIREMENTS WARNING: Risk of electric shock and serious injury. SHUT OFF BREAKER AT PANEL BEFORE INSTALLING. Please read these instruc ons before installa on to ensure op mum results and longevity of your lights. The solar panel should be charged in full sunlight for 6 to 8 hours before first use to obtain op mum results.
  • Page 2 INSTALLATION INSTRUCTIONS JSLCT-SOL SERIES OFF-GRID SOLAR SIGN LIGHT 6.0 INSTALLATION STEPS - INSTALLATION WITH BRACKETS Using the brackets as a template, mark out and drill the moun ng holes for the bracket. Insert the wall anchors provided. Fix the two brackets onto the sides of the light. Use the exis ng screws in the bracket fixing loca on by removing the screws and reinsta ng them with the brackets in place.
  • Page 3 INSTALLATION INSTRUCTIONS JSLCT-SOL SERIES OFF-GRID SOLAR SIGN LIGHT 9.0 BATTERY REPLACEMENT Step1: Loosen rear facing sc w re s Step 5: a.Replace bu on end capto light fi ng then ghten on main frame, ensure the ba ery screws firmly. Note: Do not over ghten as aluminum threads will box is loose (free) to move.

This manual is also suitable for:

Jslct-sol 31Jslct-sol 60Jslct-sol 90Jslct-sol 120