Advertisement
Quick Links
FOS-13 / FOS-19
i n s t a l l a t i o n
Adding of pigtails is possible either using welding 40 mm
HSP (heat shrink protector)) or using mechanical
connector. Our termination box has fixators for both
types of connectors. Termination box is devised for
incoming optical cables up to 9mm diameter.
Incoming cable is fastened with two plastic cable ties.
Inside of the termination box you can also find cable reel
with fixators for fiber and pigtail as well. You can fix box to
the wall by using two 4mm screws.
Wall mounting fiber termination box consists of two parts -
the base where you can find fixators for incoming cable,
cable reel, fixators for connectors, SC or Duplex-SC
adapter and box lid. The last one is fixating to the bottom
with elastic clips without any screw. For lid removing you
need flat-head screwdriver. The lid exterior has place for
box label. The box is made from white ABS plastic.
Bigger orders has place for negotiations about different
colors.
FOB-21 Installation guide
We congratulate you on purchasing our company's
fiber-optic termination box FOS-13 / FOS-19!
Wall mounting fiber termination box FOS-13 and FOS-19
are devised for fiber-optical cable termination and
connection of end-user equipment to data transmission
network.
We are producing two types of termination boxes –
FOS-13 which is devised for SC type adapters and
FOS-19 for Duplex-SC type adapters.
Technical specification:
Incoming cable up to 9 mm
One SC or one DuplexSC adapter
Dimensions 91.5*76.5*25 mm
Weight: about. 5 grams
Made from high-class ABS plastic
Page 1
g u i d e
6
COMTECH ltd.
Advertisement
Summary of Contents for Comtech EF Data FOS-13
- Page 1 We are producing two types of termination boxes – FOS-13 which is devised for SC type adapters and FOS-19 for Duplex-SC type adapters. Adding of pigtails is possible either using welding 40 mm HSP (heat shrink protector)) or using mechanical connector.
- Page 2 Installing sequence Unpack termination box. At the package you will find two body parts and two plastic cable ties 145 x 2.5 mm. Mount termination box on the wall using two 4 mm screws (not included in package). Prepare optical fiber. Clean external isolation for approx.
- Page 3 3 3 4 Cut off unneeded ends of plastic ties. In case of using HSP - do necessary In case of using mechanical splice holder welding in accordance with welding do necessary connections in accordance machine manual with user manual. warning ! Our termination box is designed only for 40 mm long HSP with 2.4 mm diameter in melted state.
- Page 4 4 6 3 6 b Fix the mechanical splice holder at Fix HSP at devised place devised place Place optical fiber on reel. NB! Avoid of sharp bending 3 3 7 Fix SC adapter or Duplex-SC adapter at devised place 3 3 8 FOB-21 Installation guide Page 4...
- Page 5 Plug patchcord into adapter 3 3 9 Force the lid till fixating We are certain that following these mounting regulations, you will be able to make secure and compact optical cable installations! Yours COMTECH. FOB-21 Installation guide Page 4 COMTECH ltd.
- Page 6 91.50 Date Name Drawn Checked Standard FOS-13 / FOS-19 State Changes Date Name FOB-21 Installation guide Page 5 COMTECH ltd.