Download Print this page

Tala PLUG-IN PENDANT Installation Manual

Advertisement

Quick Links

Installation Guide
PLUG-IN PENDANT
Thoughtful lighting, responsibly designed in London.
Thank you for making the switch to Tala.
Discover the full Tala family at tala.co.uk
BEFORE STARTING
Please read instructions thoroughly before installation
and keep them for future reference. Please take
extreme care when dealing with electrical equipment.
IMPORTANT
Bulb must be installed in fixture before turning on.
WARNING
Ensure power is turned OFF before inserting plug.
Incorrect assembly may result in risk of fire or electric
shock.
CARE AND CLEANING
We recommend cleaning with a soft dry cloth. Do not
use abrasive materials as these will damage the finish
of the product.
WARRANTY AND AFTER-CARE
This product has a two-year warranty.
If there appears to be a functional defect with the
product during this time, please contact our team at
customerservice@tala.co.uk.
Please note, the flexible cable attached to this luminaire
cannot be replaced; if the cable is damaged, recycle
the luminaire and seek a replacement.
SKU - BRAS-PAP-01-EU
SKU - GRAP-PAP-01-EU
This symbol
indicates that electrical and electronic equipment (WEEE) should not be mixed with
general household waste. For recovery and recycling, please take this product to a designated
collection point where it will be accepted free of charge. Many retailers offer this in-store.
Disposing of this product correctly will help save valuable resources and prevent any potential
negative effects on human health and the environment.
SKU - WALT-PAP-01-EU
SKU - OAK-PAP-01-EU
FOR INDOOR USE ONLY
UK-EU
IP20
220 - 240V~

Advertisement

loading

Summary of Contents for Tala PLUG-IN PENDANT

  • Page 1 UK-EU Installation Guide PLUG-IN PENDANT Thoughtful lighting, responsibly designed in London. Thank you for making the switch to Tala. Discover the full Tala family at tala.co.uk BEFORE STARTING Please read instructions thoroughly before installation and keep them for future reference. Please take extreme care when dealing with electrical equipment.
  • Page 2 Plug-in Pendant - Provided Components x1 Cord with Dimmer Dial and US plug x1 Pre-assembled Tala Pendant Oak, Walnut, Brass or Graphite x2 Insulation tubes Adjustable - position in-line with nodes x2 Ceiling Nodes Consisting of 2 x caps and 2 x bases...
  • Page 3 Dimmer to pendant 13ft STEP 1 Decide on your layout for the Plug-in pendant, some examples are shown below. Ensure you have enough cable for your desired layout before setting up the pendant, and the dimmer is always accessible Plug to dimmer 6.5ft...
  • Page 4 Adjust the dimmer for your desired light output. Join the Community Instagram: @tala | Facebook: talaHQ | Pinterest: TalaLED | Tag: lighttoliveby Tala Studios, 25B Vyner Street, London E2 9DG | hello@tala.co.uk Tala Europe B.V, Bertus Aafjeshove 40, Nieuwegein 3437JN, Netherlands...

This manual is also suitable for:

Bras-pap-01-euGrap-pap-01-euOak-pap-01-euWalt-pap-01-eu