Advertisement
Quick Links
Replace Wind Cups or Directional Vane
on Cyclone and Glide Sensors
Cyclone Sensor
Wind Cups Model: WCLTV-WSDR1 (Fits Glide and Cyclone sensors)
Wind Directional Vane Model: WVLTV-WSDR1 (Fits Cyclone Sensors)
Replace Wind Vane - Cyclone Sensors
Tool Required: Mini screwdriver with Phillips head (not included).
1. Remove the old wind vane with the screwdriver. Take note of the flat edges located on
the post of the Sensor and inside of the Wind Vane. Align the flat edges and place the new
Wind Vane on the the post of the Sensor.
Glide Sensors
Advertisement
Related Manuals for La Crosse Technology WCLTV-WSDR1
Summary of Contents for La Crosse Technology WCLTV-WSDR1
- Page 1 Cyclone and Glide Sensors Cyclone Sensor Glide Sensors Wind Cups Model: WCLTV-WSDR1 (Fits Glide and Cyclone sensors) Wind Directional Vane Model: WVLTV-WSDR1 (Fits Cyclone Sensors) Replace Wind Vane - Cyclone Sensors Tool Required: Mini screwdriver with Phillips head (not included).
- Page 2 2. Carefully tighten the screw on the side of the vane using a mini screwdriver. The screw should tighten into the flat edge of the post. When the screw is tight, gently pull on the vane to ensure it is secure. Replace Wind Cups (Same instructions for both types of sensors) Tool Required: Mini screwdriver with Phillips head (not included).