OEM Tools 24733 Operating Instructions And Parts Manual

Operating Instructions and Parts Manual
Please read and save these instructions. Read through this owner's manual carefully before using product. Protect yourself and others by observing all
safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property. Please
retain instructions for future reference.
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
customerservice@oem-tools.com
UNPACKING
After unpacking the unit, inspect carefully for any damage that may have
occurred during transit. Check for loose, missing, or damaged parts. If
any damage is observed, a shipping damage claim must be filed with the
carrier. DO NOT use the OEMTOOLS
broken, bent, cracked or damaged parts (including labels) are noted. Any
Tool Cabinet that appears damaged in any way, operates abnormally, or is
missing parts should be removed from service immediately. If you suspect
that the Tool Cabinet was subjected to shock load (a load that was dropped
suddenly, unexpectedly, etc.), immediately discontinue use until it has been
checked by a factory authorized service center.
WARNING
The following safety information is provided as a guideline to help you operate your Tool Cabinet under the safest possible conditions. Any tool or piece of
equipment can be potentially dangerous to use when safety or safe handling instructions are not known or not followed. The following safety instructions
are to provide the user with the information necessary for safe use and operation. Please read and retain these instructions for the continued safe use
of your Tool Cabinet. Failure to follow instructions listed below may result in serious injury. In addition, make sure that anyone who uses the equipment
understands and follows these safety instructions as well.
Explanation of Safety Signal Words
WARNING:
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION:
Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.
NOTES:
Provide clarity and helpful information.
Thank you very much for choosing an OEMTOOLS
For future reference, please register your new tool at www.oem-tools.com and complete the owner's record below:
Model: _______________ Purchase Date: ___________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it.
This product is designed for certain applications only. OEMTOOLS
product is not modified and/or used for any application other than that for which it was designed. If you have any questions relative to a particular application, DO
NOT use the product until you have first contacted customer service to determine if it can or should be performed on the product.
8/19
2019 OEMTOOLS
®
Tool Cabinet or Tool Chest (or set) if
®
® Product!
® cannot be responsible for issues arising from modification. We strongly recommend that this
24733, 24734, 24735, 24736, 24737, 24738
57" CHEST AND CABINET SETS
1
Blue
24735 Combo
24734 Chest
24733 Cabinet
Black
24738 Combo
24737 Chest
24736 Cabinet