Summary of Contents for Handler 31
- Page 1 Model Trimmer Manual Models: 31, 31X, 32 & 32X For Your Safety: Read this Manual before operating your Handler Model Trimmer. Always wear eye protection while using power tools.
-
Page 2: Safety Instructions
• Never use in an area where flammable vapors are present. Store your Handler tools in a DRY, clean, dust-free area, and out of the reach of children. Thank you for Choosing the Handler Model Trimmer. Unpackage your model trim mer. Check to make certain all accessories e.g., drain hose, inlet hose, model tray, etc. -
Page 3: Additional Products
Handler’s diamond model trimmer wheel includes a 3 year warranty. 31KD – for Handler models 31 and 31X and most other trimmers with 10” diameter wheels 32KD – for Handler models 32, 32X, 32-3/4 and most other trimmers with 12”... - Page 4 NOTE: The Handler trimmer is designed with a large work table, surrounded by a trough, which channels the gypsum slurry into the lower drain reservoir section of the trimmer. Occasionally large pieces of plaster and stone may clog the drain exhaust hole and cause a back-up of drain water.
- Page 5 Wheel Replacement or Rotation 1. Turn OFF unit and remove electrical plug from electrical outlet. Open “swing open” front housing by removing the plastic knob located on the left rear of the rear housing. 2. Remove the two front screws which secure the motor cover onto the motor base, behind the front housing.
- Page 6 Water Solenoid Valve Installation 1. Disconnect the Model Trimmer from electrical source. Disconnect the Water Inlet and Water Exhaust (outlet) connections. Remove the mounting nuts and bolts. 2. Turn the Model Trimmer around until the rear of the motor is facing front.
-
Page 7: Parts List
P31-03A Drain Hose Connection P31-08B Water Inlet Tubing Only P31-03B Knob W/Stud F/Hsng P31-09 Drain Hose - 42" For 31'S And 32'S P31-04 Brass Hub With Set Screw P31-10 Wrenches (Set Of 2) P31-04A Aluminum Washer For Mt Hub P31-11... - Page 8 LIMITED WARRANTY Warranty period is 1 year for Handler Model Trimmers. Handler manufacturing, LLC warrants, to the original purchaser only, that its products will be free from defects in material or workmanship for the applicable period of time indicated above following the purchase date.