Advertisement
Quick Links
TA603A/ B / C/ D/ E
Infrared Thermometer ri E
Instruction manual 1/4.
©Suzhou TASI Electronics Co.,Ltd. All rights reserved
Pack #:PB01-0117
Thank you very much for your patronage and adoption of our products. Before you use
this product, please read this manual carefully. It will teach you the correct operation
method and simple inspection and treatment essentials, so as to give full play to the
excellent performance of the instrument. Our production and testing are strictly in
accordance with the national standard GB/T 36014.1.
Warning: Laser radiation is harmful to human eyes, do not use the laser beam directly aim
at the eyes or indirectly at the eyes through a reflective surface.
Note: Please read this manual carefully before using this instrument.
Introduction
This series of hand-held Infrared Thermometer is our company newly developed high-
performance and high-quality instrument which uses ARM single-chip computer to
collect and process data. The instrument has the functions of emissivity adjustment,
maximum value, minimum value, overage value, temperature difference value, high and
low temperature alarm setting. It has the advantages of high measurement accuracy, fast
response speed, simple operation and reliable use. It can be widely used in petroleum,
chemical, railway, electric power, textile, plastic, metal processing, energy-saving and
other industries to quickly and non-contact measure the surface temperature of objects.
All objects which temperature is higher than absolute zero are constantly radiating
infrared energy. There is a certain functional relationship between the infrared energy
radiated by the object and the surface temperature of the object. By measuring the infrared
radiation of the object itself, the surface temperature of the object can be accurately
determined, which is called infrared temperature measurement. The infrared thermometer
Advertisement
Summary of Contents for TASI TA603A
- Page 1 TA603A/ B / C/ D/ E Infrared Thermometer ri E Instruction manual 1/4. ©Suzhou TASI Electronics Co.,Ltd. All rights reserved Pack #:PB01-0117 Thank you very much for your patronage and adoption of our products. Before you use this product, please read this manual carefully. It will teach you the correct operation method and simple inspection and treatment essentials, so as to give full play to the excellent performance of the instrument.
-
Page 2: Panel Introduction
is generally composed of infrared optical system, infrared detector, electronic circuit and other parts. The infrared optical system gathers the infrared energy radiated by the object within the field of view, imaging on an infrared detector, the infrared detector converts the energy into electrical signal, which is amplified by the electronic circuit and the single chip microcomputer calculates and processes various data and displays the surface temperature value of the measured target. - Page 3 − Press the "MODE" key once to realize the conversion from °C "°F; - Long press the "MODE" key for 3 seconds to enter the mode setting interface, and the following three "meters" characters 8 will cyclic flashing display "EMS HI,LOW'MAX- >MIN->DIF->AVG-,STO->VOL", and select the current mode to set relevant parameters: - EMS: Press this mode to flash, press the"A"...
- Page 4 -32-1000°C(0.1°C)/1000 above 1°C Response time and wavelength Less than 500ms 8--14um Emissivity 0.1-1.00 adjustable (step length 0.01) Measuring object distance ratio 50:1(TA603A/B/C) / 80:1(TA603D/E) Laser aiming Less than 1MW 650nm laser grade II C/ Fconversion Screen display mode VA Color screen...
- Page 5 material reaches balance, use infrared thermometer (the preset emissivity is 1.00, 0.1-1.00, adjustable) measure the temperature of the cover on the material and adjust the emissivity value of the instrument until the measured temperature is equal to the real temperature, and the emissivity is the emissivity of the material.
- Page 6 Oxidation 0.20-0.50 Nickel Electrolyte 0.05-0.15 Platinum black 0.90 Silver 0.02 Non oxidation 0.05 Tungsten Polished 0.03-0.10 Steel Cold rolled steel 0.70-0.90 Wool board 0.40-0.60 Cast steel plate 0.10 Oxidation 0.70-0.90 Stainless steel 0.10-0.80 Titanium Polished 0.05-0.20 Oxidation 0.05-0.20 Zinc Oxidation 0.10 Polished 0.02...
- Page 7 After the infrared thermometer is used for a period of time, dust will be accumulated on the lens. Clean ball can be used to blow off dust on the surface or clean cotton swab is used to clean the lens surface with a little water. −...