Page 1
UR20S Series Gas detectors Technical Data Sheet WattsIndustries.com...
Page 2
Description UR20S Series gas detectors are used for detecting inflammable or toxic gases in classified areas in industrial environments and boiler rooms. All models can be used with CIVIC1 Series control units (one sensor) and CIVIC4 Series control units (up to 4 sensors) or with other control units set up to receive a 4-20 mA signal (generally combined fire/intrusion detection systems).
Page 3
Operation UR20S Series gas detectors are equipped with an internal sensor that is sensitive to the different gases to be monitored. After a warm-up and stabilisation period, in which the sensing element comes up to optimum operating temperature, the gas...
Page 4
The descriptions and photographs contained in this product specification sheet are supplied by way of information only and are not binding. Watts Industries reserves the right to carry out any technical and design improvements to its products without prior notice. Warranty: All sales and contracts for sale are expressly conditioned on the buyer’s assent to Watts terms and conditions found on its website at www.wattsindustries.com.