Uni-bond E-2109AC Installation Manual

Last Updated: 03/30/2022
E-2109AC
Wiring Information
Function
Power
Ground
Dimming
Pattern Selection & Synchronization
Light should be fused with 5 Amp Fuse (
Pattern Selection
Briefly Connect Pattern Selection wire (Yellow wire) to Power wire (Red wire)
- Once to the next pattern
- Quickly 3 times to flash pattern #1
Synchronization
All lamps must be set to the same pattern before synchronization.
Connect Yellow Wires of all units together for synchronization.
Flash Patterns
NO. Flash Patterns
1 Double Flash
2 Single Flash (2 Hz)
3 Triple Flash (2 Hz)
4 Quad Flash (2 Hz)
5 Random Patterns
6 Steady
Single Flash [ ]
7
SAE Class 1
Double Flash [ ]
8
SAE Class 1
Triple Flash [ ]
9
SAE Class 1
Quad Flash [ ]
10 SAE Class 1
Quint Flash [ ]
11
SAE Class 1
12 Mega Flash
13 Giga Flash
Ultra Flash [ ]
14
SAE Class 1
15 Single-Quad Flashes
Suggested Switch Connection
From Battery Positive
Battery Ground
Switch #1
ST100
(ON/OFF)
Ground
Power
Pattern Selection
& Synchronization
Dimming Function
Wire Colour Connect To
Red +12/24 V DC
Black - Ground
White +12/24 V DC
Yellow +12/24 V DC
)
ATM05 sold separately
NO.
16
17
18
19
20
21
22
23
24
25
26
27
28
29
(switches sold separately)
NOTE: If dimming function is not
Jumper Wires
Switch #2 Switch #3
ST108 ST100
(OFF-Momentary ON) (ON/OFF)
NOTE: Disassembling lamp or cutting the wires voids the warranty
E-2109ACM
ON/OFF Switch
Flash Pattern Button
Momentarily press the button
- Once to the next pattern
- Quickly 3 times to flash pattern #1
Flash Patterns
Hi/Lo Single Flash
Single-Triple-Quad Flashes
Half Steady / Half Double Flash
Left/Right Alternating Single Flash
Left/Right Alternating Double Flash
Left/Right Alternating Triple Flash
Left/Right Alternating Quad Flash
Left/Right Alternating Quint Flash
Left/Right Alternating Mega Flash
Left/Right Alternating Giga Flash
Left/Right Alternating Ultra Flash
Left/Right Alternating Single-Quad Flashes
Left/Right Alternating Hi/Lo Single Flash
Left/Right Alternating Single-Triple-Quint Flashes
required, this connection
can be skipped
Operation:
Switch # Lamp Function
Switch 1 Power
Switch 2 Pattern Selection
& Synchronization
Switch 3 Dimming Function (optional)
Flash Pattern button
ON/OFF button