Summary of Contents for ICP CON PPDS-700-MTCP Series
Page 1
PPDS-700-MTCP Series Quick Start v1.5, Aug. 2018 What’s in the box? In addition to this guide, the package includes the following items: PPDSM-700-MTCP PPDS-700-MTCP For PPDS-700-MTCP Only PPDS(M)-700-MTCP Quick Start x 1 Plastic Rack x1 Series x 1 (This Document)
Page 2
Connecting the Power and Host PC 1) Make sure your PC has workable network settings. Disable or well configure your Windows firewall and Anti-Virus firewall first, else the “Search Servers” on Chapter 3 may not work. (Please contact with your system Administrator) 2) Connect both the PPDS-700-MTCP and your PC to the same sub network or the same Ethernet switch.
Page 3
Connecting the Modbus Device 1) Connect the Modbus device (e.g., M-7055-D, Optional) to the COM2 (RS-485 bus) on the PPDS-700-MTCP. RS-485 Wiring RS-232 Wiring 2) Supply power (+10 ~ +30 V ) to the Modbus device (e.g., M-7055D, Device ID: 1).
Configuring Network Settings 1) Install the VxComm Utility, which can be obtained from the web site: http://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/vxcomm_driver/windows/ 2) Double click the VxComm Utility shortcut on the desktop. 3) Click the “Search Servers” to search your PPDS-700-MTCP. 4) Double click the name of PPDS-700-MTCP to open the “Configure Server (UDP)”...
Page 5
Configuring Virtual COM Ports 1) Wait 2 seconds and click “Search Servers” button again to ensure the PPDS-700-MTCP is working well with new configuration. 2) Click the name of PPDS-700-MTCP to select it. 3) Click the “Add Server[S]” button. 4) Assign a COM Port number and click “OK” to save your settings. ...
Page 6
6) Click the “Restart Driver” item in the “Tools” menu to display the “VxComm Utility: Restarting Driver” dialog box. 7) Click the “Restart Driver” button. Testing Modbus Device through Virtual COM Port 1) In the VxComm Utility, click the “Modbus RTU Master”...
Page 7
3) Refer to “Protocol Description” and type the Modbus command in the “Command” field then click the “Send Command” button. If the response data is correct, it means the test is success. The Modbus command settings depends on your Modbus device. Modbus/TCP to Modbus/RTU Gateway 1) Open web browser, type the URL address of the PPDS-700-MTCP and press “Enter”...
Page 8
4) In the VxComm Utility, click the “Modbus TCP Master” option from the “Tools” menu to open the Modbus TCP Master Utility. 5) In the Modbus TCP Master Utility, type the IP address of PPDS-700-MTCP and click the “Connect” button. ...
This manual is also suitable for:
Ppds-700-mtcpPpdsm-700-mtcpPpds-732-mtcp crPpds-743-mtcp crPpds-752-mtcp crPpds-721-mtcp cr...
Show all