Download Print this page

WaterUps 15090 Assembly Manual

Square planter

Advertisement

Quick Links

Assembly Guide
WaterUps
15090
16050
17050
Wicking our World
®
Square Planter
Before you start
Watch the full assembly guide video on our
YouTube page. You can go to it using the
button or the QR code below.
Assembly Guide video
TM
®
WaterUps
Getting Started page
Our Getting Started page contains lots of
helpful information. You can go to it using the
link or the QR code below.
Getting Started page
www.waterups.com.au

Advertisement

loading

Summary of Contents for WaterUps 15090

  • Page 1 Assembly Guide ® WaterUps Square Planter 15090 16050 17050 ® Before you start WaterUps Getting Started page Watch the full assembly guide video on our Our Getting Started page contains lots of YouTube page. You can go to it using the helpful information.
  • Page 2 Contents 1 x WaterUps ® Square Planter 1 x WaterUps ® Wicking Cell 1 x Inlet Pipe & Cap 1 x Overflow Pipe 1 x 2L bag of Perlite You will need Approximately 1 square metre of space to build on.
  • Page 3 1. Cut the hole in the WaterUps ® 6. Add potting mix or soil to the Cell for the water inlet pipe. planter. Using a sharp knife cut along the circular You will now need 2 x 25 litre bags of...
  • Page 4 Copyright © 2022 WaterWix Pty Ltd. All rights reserved. WaterWix Pty Ltd – ABN 58 166 973 011. circumstances. No responsibility can be accepted by WaterUps, the WaterUps Logo and Wicking our World ® WaterUps , WaterWix Pty Ltd, or its staff for any loss are registered trademarks of WaterWix Pty Ltd.

This manual is also suitable for:

1605017050