Advertisement
Quick Links
NOTICE
* Please make sure that you have all parts indicated and are in good condi on before you begin assembly
of this item. Refer to part list and hardware list below for guidance .
* This item should be assembled on a so surface to prevent scratching the finish during assembly.
* This item may require periodic ghtening.
* If you are having difficulty, our friendly customer care team is always here to help . Please
email customersupport@safavieh.com
PREPARATION
* Before beginning assembly of product , make sure all parts are present . Compare parts with parts
contents list and hardware contents list.
* If any part is missing or damaged, do not a empt to assemble the product.
* Es mated Assembly me : 10 minutes
* Tools Required for Assembly (included): Allen key
CARE AND MAINTENANCE
*For cleaning surface of wood , dampen a cloth with diluted solvent or cleaning solu on and gently
rub over a small area at a me. Finally wipe the area with clean dampened cloth to remove any cleanser.
*Do not use acidic cleaners (vinegar , lemon spray)
*Wipe up spills immediately (even if it is only water)
*Clean surfaces with warm water or marble cleaner.
Part List and Hardware List
PIECE
DESCRIPTION
Shelf
A
B
Leg
C
Marble
Hw1
Allen bolt 6 X 1 X 25 mm
Hw2
Flat washer 16 x 8 mm
Allen key
Hw3
QUANTITY
PICTURE
1X
4X
1X
20X
20X
1X
Item#
SFV5738A
Product dimensions: 62.99"W* 13.7"D*17.7"H
WARNING
Weight Capacity - 110 LBS
Warning : Do not stand on TVC
Warning : Do not over torque bolts.
Advertisement
Related Manuals for SAFAVIEH COUTURE Cora Rose SFV5738A
Summary of Contents for SAFAVIEH COUTURE Cora Rose SFV5738A
- Page 1 NOTICE * Please make sure that you have all parts indicated and are in good condi on before you begin assembly of this item. Refer to part list and hardware list below for guidance . * This item should be assembled on a so surface to prevent scratching the finish during assembly. * This item may require periodic ghtening.
- Page 2 PREPARATION * Before beginning assembly of product , make sure all parts are present . Compare parts with parts contents list and hardware contents list. * If any part is missing or damaged, do not a empt to assemble the product. * Es mated Assembly me : 10 minutes * Tools Required for Assembly (included): Allen key * If you are having difficulty, our friendly Customer Care team is always here to help.
- Page 3 STEP6 Place the Marble gently as shown.
- Page 4 Grids Surface STEP8 Drill pre-holes on wall as shown in fig(1) for the p protector. Repeat STEP7 The unit needs to be secured against wall using p an p kit. Please the step with same distance of both p protector a ached in step. Insert fischer Consult your local hardware store to get advice of appropriate screw and to each hole on the wall using hammer as shown in fig(2) .