Above All ACORN LED POST TOP Instruction Manual

SUITABLE FOR MODEL
SAFETY INSTRUCTION
READ CAREFULLY BEFORE INSTALLING FIXTURE. PLEASE KEEP THIS MANUAL FOR FUTURE USE.
Fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding
is required for safety.
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICATION CODE BY A PERSON
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
MAKE CERTAIN POWER IS OFF BEFORE INSTALLING OR MAINTAINING FIXTURE.
CHECK THAT VOLTAGE IS COMPATIBLE WITH FIXTURE DRIVER. USE APPROVED CONNECTORS FOR ALL
ELECTRICAL CONNECTIONS.
MAINTENANCE CAUTION
1. Review the wire connection before beginning, and make sure fixture is grounded properly.
2. For lighting controls, follow control instructions carefully.
3. Turn power off and wait for fixture to cool before performing maintenance.
4. Maintenance must be done by professionals.
WIRE CONNECTION
Universal voltage driver permits operation at
120VAC thru 277VAC, 50 or 60 Hz.
Add: 1501 Industrial Way N, Toms River, NJ 08755 Phone: 866-222-8866 E-mail: info@abovealllighting.com
Web: www.AboveAllLighting.com ©2016 ABOVE ALL Lighting, Inc. All rights reserved
THE ACORN LED POST TOP (VPTA)
INSTALLATION
ACCESSORY PACK
WIRE NUT X 3
ACCESSORY PACK FOR PHOTOCELL
PHOTOCELL X 1
ACCESSORY PACK FOR 7 PIN
SHORTING CAP X 1
Note: If fxture is furnished with photocell receptacle,
please make sure install the photocell or shorting cap
Instructions Manual
1