Advertisement
Quick Links
Product Installation Guidelines
®
CliniLever
PRODUCT CODES:
- TCWTC150CC
- TCWTC80CC
- TCWTJ150CC
- TCWTJ80CC
SPECIFICATIONS
−
The Galvin Specialised CliniLever
hospitals, aged care facilities, schools and in-home care.
−
®
CliniLever
products provide state of the art features to comply with the latest healthcare guidelines.
−
The dual levers for on/off, hot and cold temperature have a straight forward operation which simplifies
hand washing.
−
Our highly sought after lever handle design can easily be operated with wrists or elbows.
−
The main body is made of solid dezincification resistant (DR) brass rod, with a DR brass fixed outlet.
Quick action SBA's include brass jumper valve / ceramic cartridge components, with red and blue
−
indicator buttons on 80mm/150mm lever action handles.
IMPORTANT: All CliniLever
premises in good working order.
TECHNICAL DATA
Inlet
Outlet
TCWTJ150CC, TCWTJ80CC, TCWTJ150HC, TCWTJ80HC
Headwork
TCWTC150CC, TCWTC80CC, TCWTC150HC, TCWTC80HC
Working Pressure Range (kPa)
Working Temperature (°C)
Nominal Flow Rate (LPM)
Finish
NOTE: Galvin Specialised continually strive to improve their products. Specifications may change without notice.
© Galvin Engineering Pty Ltd
CP-BS Hospital Wall Top Assembly
- TCWTC150HC
- TCWTC80HC
- TCWTJ150HC
- TCWTJ80HC
®
product range is primarily used for hand washing applications in
®
healthcare taps are tested in accordance with AS/NZS 3718 and leave our
Document No.: 001.00.10.18
Version 1, 4 November 2022, Page 1 of 4
G 5/8" BSP- Male
N/A
Jumper Valve
Ceramic Disc
Min
50
Max
500
Min
5
Max
65
N/A
Chrome
Advertisement
Related Manuals for Galvin Engineering CliniLever TCWTC150CC
Summary of Contents for Galvin Engineering CliniLever TCWTC150CC
- Page 1 Jumper Valve Headwork TCWTC150CC, TCWTC80CC, TCWTC150HC, TCWTC80HC Ceramic Disc Working Pressure Range (kPa) Working Temperature (°C) Nominal Flow Rate (LPM) Finish Chrome NOTE: Galvin Specialised continually strive to improve their products. Specifications may change without notice. © Galvin Engineering Pty Ltd...
- Page 2 − Ensure jumper valve and fibre washer are fitted onto the threaded sleeve. to spindle assembly. − Screw entire assembly into the wall body. − Fasten securely using a spanner. © Galvin Engineering Pty Ltd...
- Page 3 Build up of scale on spindle, spindle Remove jumper valve, clean and (jumper valve) worn or o-ring has been damaged regrease. Replace o-ring. Complete SBA may need to be replaced. Handle is loose Screw has come loose Tighten handle screw © Galvin Engineering Pty Ltd...
- Page 4 WARRANTY The warranty set forth herein is given expressly and is the only warranty given by the Galvin Engineering Pty Ltd. With respect to the product, Galvin Engineering Pty Ltd makes no other warranties, express or implied. Galvin Engineering Pty.