Advertisement
Quick Links
01865 767676
sales@unicol.com
www.unicol.com
PFT1 / PFT3 / PFT4 / PFT21
Screen Size: 40-100"
Guide Max. Weight: 60kg
Revised 08/07/21
*Please check model specific details before installing*
WARNING
Please carefully inspect the product before assembling. If you notice any apparent damage, call your
carrier claims agent and do not continue the installation until it has been reviewed. Please watch for
pinch points. Do not put your fingers between moveable parts. Do not tamper with or disassemble any
spring loaded parts. Before installing, make sure that the supporting surface will support five times the
combined load of the solution and the hardware. Never exceed the maximum load capacity. Please also
layout all components to ensure that you have all of the required parts before proceeding (see BOM list
on following page). Use of this product for anything other than its specified use may result in failure or
personal injury. This product is intended for indoor use only. We recommend using a qualified trades
person for installation. Use an assistant or lifting equipment to lift and position products.
For support, please call: +44 (0)1865 767676 or email: sales@unicol.com
Advertisement
Related Manuals for Unicol PFT1
Summary of Contents for Unicol PFT1
- Page 1 This product is intended for indoor use only. We recommend using a qualified trades person for installation. Use an assistant or lifting equipment to lift and position products. For support, please call: +44 (0)1865 767676 or email: sales@unicol.com...
- Page 2 01865 767676 sales@unicol.com www.unicol.com TOOLS REQUIRED INSTALLERS REQUIRED 17mm Spanner 5mm Allen Key Pozidrive Screwdriver COMPONENTS DESCRIPTION Mast Screen Mount Back Plate Screen Mount Arms Base Alternative Mount Back Plate & Arms Alternative Mast Example Revised 08/07/21...
- Page 3 01865 767676 sales@unicol.com www.unicol.com STEP 1 STEP 2 With the mast laying flat on a table (as shown Line the back plate up with the mast, choosing the above) pick up the base (with the help of another best slots for height positioning. Fix 4 hex head person if necessary) and offer the base to the mast.
- Page 4 01865 767676 sales@unicol.com www.unicol.com STEP 5 Gently lower the screen until the arms are securely hanging on top of the back plate. Once centered, adjust the level of the screen with the two top screws on the mount arms. Once leveled secure the screen by tightening the bottom two screws.