Download Print this page
nedis HTFA16GY Manual

nedis HTFA16GY Manual

Ceramic fan heater

Advertisement

Quick Links

Ceramic Fan Heater
Article number: HTFA16GY/HTFA17GY
Nedis BV
De Tweeling 28, 5215 MC 's-
Hertogenbosch, The Netherlands 03/22
Preface
Thank you for purchasing the Nedis HTFA18WT/HTFA19WT.
This document is the user manual and contains all the information for correct, efficient and
safe use of the product.
This user manual is addressed to the end user. Read this information carefully before
installing or using the product.
Always store this information with the product for use in the future.
Product description
Intended use
The Nedis HTFA16GY/HTFA17GY is a heater that allows the user to control the
surrounding temperature.
This product is only suitable for well insulated spaces or occasional use.
The built-in thermostats measures the room temperature.
And the built-in thermostat automatically switches off the product when the desired
room temperature is reached.
When the room temperature decreases below the desired temperature, the product
switches back on automatically.
The bottom of the heater is equipped with a tip-over safety switch.
This switch automatically switches off the product if it falls over.
The Nedis HTFA16GY/HTFA17GY is equipped with an oscillation mode. During the
oscillation mode the base of the product rotates slowly from side to side.
This product can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction concerning use of the product in a
safe way and understand the hazards involved. Children shall not play with the
product. Cleaning and user maintenance shall not be done by children without
supervision.
Children of less than 3 years should be kept away.
The product is intended for indoor use only.

Advertisement

loading

Summary of Contents for nedis HTFA16GY

  • Page 1 Always store this information with the product for use in the future. Product description Intended use • The Nedis HTFA16GY/HTFA17GY is a heater that allows the user to control the surrounding temperature. • This product is only suitable for well insulated spaces or occasional use.
  • Page 2 Any modification of the product may have consequences for safety, warranty and proper functioning. Specifications Product Ceramic Fan Heater Article number HTFA16GY/HTFA17GY 9.2 x 15 x 21 cm Dimensions (l x w x h) 11.5 x 16.5 x 24 cm Input power 220 - 240 V ~ 50 / 60 Hz...
  • Page 3 Main parts (image A) ① Air outlet ② Base ③ Handle ④ Air inlet ⑤ Power plug Control panel (image B) ① Mode dial ② OFF position ③ Fan mode ④ Low heat mode ⑤ High heat mode ⑥ Oscillation mode button* ⑦...
  • Page 4: Safety Instructions

    Safety instructions ⚠ WARNING • Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference. • Only use the product as described in this document. •...
  • Page 5: Installation

    Installation Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com. Before first use 1. Remove all packaging.
  • Page 6 Using the product 1. Switch the mode dial B① to the desired mode: Mode Heater OFF position B② Fan mode B③ Low heat mode B④ 1000 W power High heat mode B⑤ 1500 W power Oscillation mode B⑥ 1500 W power + oscillation* * = The product rotates slowly over the base from side to side.
  • Page 7: Warranty

    Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product. This product is designed for private use (normal domestic use) only. Nedis is not responsible for wear, defect and/or damages caused by commercial use of the product.

This manual is also suitable for:

Htfa17gyHtfa18wtHtfa19wt