magicpak HWC12P Series Installation Instructions

This is a safety alert symbol and should never be ignored. When you see this symbol on labels or in manuals, be alert to
the potential for personal injury or death.
WARNING
This chassis shall be installed by a qualified agency in
accordance with the manufacturer's instructions and
all applicable codes and requirements of the authority
having jurisdiction. If the information in these instructions
is not followed exactly, electric shock, fire, or explosion
may result, which may cause property damage, personal
injury, or death. The qualified service agency performing
this work assumes responsibility for properly installing
this chassis.
WARNING
Turn off gas to the appliance before performing any
service. Failure to disconnect gas supply can result in
property damage, personal injury, or death.
WARNING
Consult current HWC specifications to ensure wire and
breaker are sized appropriately.
Manufactured By
Allied Air Enterprises LLC
A Lennox International, Inc. Company
215 Metropolitan Drive
West Columbia, SC 29170
508094-03
INSTALLATION INSTRUCTIONS
HWC12P*/13P*
MAGICPAK CHASSIS
This manual must be left with the homeowner for future reference.
Save these instructions for future reference
This Chassis is designed for, and should only be used in,
MagicPak All-In-One™ HWC models of similar cooling
capacity. Any other use could result in actions that might
cause property damage, personal injury, or death.
Risk of electrical shock. Disconnect all
remote power supplies before installing
or servicing any portion of the system.
Failure to disconnect power supplies can
result in property damage, personal injury,
or death.
Quantity
1
Wiring Diagram Label
1 Installation Instructions
*508094-03*
Issue 2208
WARNING
WARNING
Parts List
Part
*508094-03*
Page 1 of 2