Advertisement
Quick Links
Specifications
MODEL
Nominal Impedance (Z)
DC Resistance (Re)
Resonance Frequency (Fs)
Piston Area (Sd)
Force Factor (BL)
Mechanical Q Factor (Qms)
Electrical Q Factor (Qes)
Total Q Factor (Qts)
Sensitivity 1W/M (SPL)
Mechanical Compliance (Cms)
Moving Mass (Mms)
Linear Excursion (Xmax)
Volume Acoustic
Compliance (Vas)
Reference Efficiency (NO.)
Nominal Power (Pe)
Peak Power
Frequency Response
Voice Coil Diameter
Displacement
Dimensions
Overall Diameter (A)
Cut Out Diameter (B)
Mounting Depth (C)
®
DC210D2
1.8 ohms
3.6 ohms
29.4605 Hz
0.0314 m2
22.8048 T.m
7.8504
0.3561
0.3407
82.1895
0.1050 mm/N
277.9171 g
16 mm
14.4725 Ltr
0.511 cu ft
0.10%
1000 Watts
1500 Watts
20-200 Hz
3 in/76.2 mm
0.0889cu ft/ 2.517Ltr
10.67in / 271mm
9.30in / 236mm
6.07in / 154mm
10-INCH SUBWOOFER
DUAL 2 OHM VOICE COILS
10-INCH SUBWOOFER
DUAL 4 OHM VOICE COILS
DC210D4
3.2 ohms
6.4 ohms
27.6341 Hz
0.0314 m2
30.1647 T.m
5.6696
0.3275
0.3096
82.4295
0.1237 mm/N
268.1933 g
16 mm
17.0451 Ltr
0.602 cu ft
0.11%
1000 Watts
1500 Watts
20-200 Hz
3 in/76.2 mm
0.0889cu ft/ 2.517Ltr
A
B
DC210D2
DC210D4
C
Advertisement
Summary of Contents for AAMP Global Stinger AUDIO DC210D2
- Page 1 DC210D2 ® 10-INCH SUBWOOFER DUAL 2 OHM VOICE COILS DC210D4 10-INCH SUBWOOFER DUAL 4 OHM VOICE COILS Specifications MODEL DC210D2 DC210D4 Nominal Impedance (Z) 1.8 ohms 3.2 ohms DC Resistance (Re) 3.6 ohms 6.4 ohms Resonance Frequency (Fs) 29.4605 Hz 27.6341 Hz Piston Area (Sd) 0.0314 m2...
- Page 2 Enclosure Size (Matters) Recommended Sealed 1.25-1.5 cu.ft. Internal Volume Enclosure is the fancy name for a speaker box. You can go Recommended Vented internal 1.0-2.0 cu.ft. Volume w/o vent displacement ready-made or build your own. Ported or Sealed. To the right are the recommended enclosure size ranges stated in Recommended Vented Area 17.75 cu.in.
- Page 3 Subwoofer Wiring Diagrams DC2 Subwoofers are Dual Voice Coil (DVC), meaning they have two positive and negative terminals per speaker. The voice coils can be wired in parallel or series or a combination of both. The subwoofer should be wired to match the amplifiers lowest impedance as stated by the amplifier manufacturer.
- Page 4 Please DO NOT return to seller For help with installation, replacement parts, warranty or returns, please contact us directly at 727-732-3114 or support@stingerelectronics.com ® Stinger is a Power Brand of AAMP Global 15500 Lightwave, Clearwater, Florida 33760 © 2022 AAMP Global IG-DC210D REV 052422...